Elemental Analysis · Labindia Equipment

Ball Mill

10 products View all

Planetary Nano Ball Mill - BM2200+

Grinds and mixes powders down to the nanometre range, for advanced materials research and sample preparation.

High Energy Ball Mill - MM1600

High-impact milling for fast size reduction, mechanical alloying and the synthesis of new materials.

Planetary Ball Mill - BM 1500+ Series

Fine grinding, mixing and homogenising of hard, brittle and fibrous samples, wet or dry.

Planetary Ball Mill - BM1150+

Fine grinding, mixing and homogenising of hard, brittle and fibrous samples, wet or dry.

Planetary Ball Mill - BM 1100+

Fine grinding, mixing and homogenising of hard, brittle and fibrous samples, wet or dry.

Planetary Ball Mill - BM 1200+

Fine grinding, mixing and homogenising of hard, brittle and fibrous samples, wet or dry.

Planetary Ball Mill - BM 1400+

Fine grinding, mixing and homogenising of hard, brittle and fibrous samples, wet or dry.

Cryogenic Ball Mill - CM1100

Grinds tough, elastic and temperature-sensitive samples under liquid-nitrogen cooling, keeping them intact.

Micro Ball Mill - MM1100

Quick grinding and homogenising of small sample volumes, ideal for routine laboratory preparation.

Ball Mill - BM Series

Reliable grinding and mixing of minerals, ores, soils and powders ahead of analysis.

Cutting Mill

6 products View all

Cutting Mill - C10

Cuts soft, fibrous and heterogeneous materials such as plant matter, plastics and waste into uniform particles.

Cutting Mill - C25

Cuts soft, fibrous and heterogeneous materials such as plant matter, plastics and waste into uniform particles.

Cutting Mill - C90

Cuts soft, fibrous and heterogeneous materials such as plant matter, plastics and waste into uniform particles.

Cutting Mill - C Series

Cuts soft, fibrous and heterogeneous materials such as plant matter, plastics and waste into uniform particles.

Cutting Mill - C10/C25/C90

Cuts soft, fibrous and heterogeneous materials such as plant matter, plastics and waste into uniform particles.

Portable Cutting Mill - C10

A compact cutting mill for preparing fibrous and soft samples on site or on a crowded bench.

Hammer Mill

1 product View all

Hammer Mill - HM 1100

Impact grinding of brittle materials like grain, coal and minerals into consistent particle sizes.

Knife Mill

3 products View all

Knife Mill - KM1100

Homogenises food, feed and moist samples with rotating blades for representative analysis.

Knife Mill - KM1300

Homogenises food, feed and moist samples with rotating blades for representative analysis.

Knife Mill - KM1100/KM1300

Homogenises food, feed and moist samples with rotating blades for representative analysis.

Ultra Centrifugal Mill

1 product View all

Ultra Centrifugal Mill - UCM1100

Rapid, gentle fine grinding of soft to medium-hard materials with minimal heat build-up.

Vibratory Disc Mill

4 products View all

Vibratory Disc Mill - VDM 1000 Series

Pulverises hard, brittle samples such as ores, rocks and slag to analytical fineness in minutes.

Vibratory Disc Mill - VDM 1100

Pulverises hard, brittle samples such as ores, rocks and slag to analytical fineness in minutes.

Vibratory Disc Mill - VDM 1200

Pulverises hard, brittle samples such as ores, rocks and slag to analytical fineness in minutes.

Vibratory Disc Mill - VDM Series

Pulverises hard, brittle samples such as ores, rocks and slag to analytical fineness in minutes.

Disc Mill

1 product View all

Disc Mill / Pulverizer - DM 1100

Continuous fine grinding of hard and brittle materials between rotating discs.

Mortar Grinder

1 product View all

Mortar Grinder - HG 1100

Grinds, mixes and triturates powders and pastes, reproducing manual mortar work consistently.

Cyclone Mill

1 product View all

Cyclone Mill Twister - TW1100

Fast grinding of grain, feed and food with cyclone separation, suited to NIR and nutrient analysis.

Graphite Furnace

1 product View all

Graphite Furnace - GRF

Ultra-high-temperature processing in an inert or vacuum atmosphere using graphite heating elements.

Vacuum Furnace

1 product View all

Vacuum Furnace - PVAC

Heat treatment, sintering and brazing under vacuum to prevent oxidation and contamination.

Atmosphere Controlled Furnace

1 product View all

Atmosphere Controlled Furnace - ACF Series

Heat treatment under inert or reducing gases for oxidation-free sintering and annealing.

Modular Tube Furnace

1 product View all

Modular Tube Furnace - MTF

A configurable tube furnace for annealing, synthesis and controlled-atmosphere work.

Modular Split Tube Furnace

1 product View all

Modular Split Tube Furnace - ASP

A hinged tube furnace that opens for fast loading and cooling of tubes and reactors.

High Temperature Chamber Furnace

1 product View all

High Temperature Chamber Furnace - MoS Series

Box furnace for sintering, ceramics and material testing at very high temperatures.

Heat Treatment Furnace

2 products View all

Heat Treatment Furnace - HDF Series

Hardening, tempering and annealing of metal parts with precise temperature control.

Heat Treatment Furnace - HLF Series

Hardening, tempering and annealing of metal parts with precise temperature control.

Multi-Zone Tube Furnace

1 product View all

Multi-Zone Tube Furnace - PZF Series

Independently controlled heating zones for uniform or graded temperature profiles along the tube.

Chamber Furnace

2 products View all

Chamber Furnace - PLF Series

A general-purpose muffle furnace for ashing, drying and heat treatment in the laboratory.

Chamber Furnace - MoS Series

A general-purpose muffle furnace for ashing, drying and heat treatment in the laboratory.

Split Tube Furnace

1 product View all

Split Tube Furnace - ASP-W

Opens along its length to place and remove tubes quickly, ideal for reactor setups.

Tube Furnace

3 products View all

Tube Furnace - PTF Series

Heats samples in a tube under air, vacuum or controlled gas for synthesis and annealing.

Tube Furnace - STF Series

Heats samples in a tube under air, vacuum or controlled gas for synthesis and annealing.

Tube Furnace - PTF/PZF/STF Series

Heats samples in a tube under air, vacuum or controlled gas for synthesis and annealing.

Ash Fusion Furnace

1 product View all

Ash Fusion Furnace - LAF16

Determines the ash fusion temperatures of coal, coke and biomass to predict slagging behaviour.

Ashing Furnace

1 product View all

Ashing Furnace - PAF Series

Burns off organic matter to measure ash content in coal, food, feed and polymers.

Asphalt Chamber Furnace

1 product View all

Asphalt Chamber Furnace - PASF

Ignition-method furnace for measuring binder content in asphalt mixtures.

Chamber Furnace Eco

1 product View all

Chamber Furnace Eco - Eco Series

An economical chamber furnace for everyday ashing, drying and heat treatment.

MoS Series Chamber Furnace

1 product View all

MoS Series Chamber Furnace

High-temperature chamber furnace with molybdenum disilicide elements for ceramics and sintering.

Furnaces

1 product View all

Furnaces - Multiple series

Laboratory furnaces for heat treatment, ashing and sintering across research and quality control.

XRF Analyzer

4 products View all

ElvaX Plus XRF Benchtop Spectrometer

Benchtop XRF for fast, non-destructive elemental analysis of metals, minerals and powders.

ElvaX Pro XRF Benchtop Spectrometer

Benchtop XRF with extended range and sensitivity for demanding elemental analysis.

Prospector 2 XRF Handheld Spectrometer

Handheld XRF for on-the-spot alloy identification, scrap sorting and precious metal testing.

Prospector 3 Handheld XRF Spectrometer

Portable XRF for rapid elemental analysis in the field, at the scrapyard or on the shop floor.

ICP-OES

1 product View all

ICP-OES - ICP 5000 DV

Measures many elements at trace levels in a single run, for environmental, food and materials testing.

ICP-MS

1 product View all

ICP-MS - ICP-MS 5500

Ultra-trace and isotopic elemental measurement for the most demanding quality and research work.

Spark OES

2 products View all

Optical Emission Spectrometer (OES) - LABSPECTRO

Spark OES for fast, precise composition analysis of metals and alloys in production control.

Optical Emission Spectrometer (OES) - LABSPECTRO PRO

Spark OES for fast, precise composition analysis of metals and alloys in production control.

CHN Elemental Analyzer

1 product View all

CHN Elemental Analyser - LCHN3600

Determines carbon, hydrogen and nitrogen content in organic and inorganic samples.

Carbon Sulfur Analyzer

1 product View all

Infrared Carbon Sulfur Analyser - LCS 3500

Measures carbon and sulfur in steel, iron, alloys, ores and other inorganic materials.

IR Sulfur Analyzer

1 product View all

IR Sulfur Analyser - LS3000/IR

Infrared determination of total sulfur in coal, coke, oils and other fuels.

Proximate Analyzer

1 product View all

Automatic Proximate Analyzer (TGA) - LPA4000

Automatically measures moisture, volatile matter, ash and fixed carbon in coal and biomass.

Bomb Calorimeter

5 products View all

Bomb Calorimeter - BCI-2000

Measures the gross calorific value of coal, fuels, biomass and food samples.

Automatic Bomb Calorimeter - BCI 2000/T

Automated calorific value testing with less operator time for busy fuel laboratories.

Fully Automatic Bomb Calorimeter - BCI 3000

Fully automated calorific value measurement for high-throughput fuel testing.

Accelerating Rate Calorimeter - TAC-500AE

Studies thermal runaway and reaction hazards for process safety and battery testing.

Reaction Calorimeter - RC HP-1000AE

Measures the heat released by chemical reactions to support safe process scale-up.

Coal Quality Analyzer

1 product View all

Portable Coal Quality Test Analyser - FC-KH-01

Portable testing of coal quality parameters at mines, ports and power plants.

Flash Point Tester

1 product View all

Micro Continuous Closed-Cup Flash Point Tester - FP CC-420AE

Determines the closed-cup flash point of fuels and solvents using small sample volumes.

Vapor Pressure Tester

1 product View all

Micro Vapor Pressure Tester - VP TE-1000AE

Measures the vapour pressure of fuels and volatile liquids for quality and safety compliance.

Explosion Tester

1 product View all

20L Spherical Explosion Tester - ECD-20AE

Assesses the explosion severity of combustible dusts in a 20-litre sphere.

Minimum Ignition Energy Tester

1 product View all

Dust Cloud Minimum Ignition Energy Tester - MIE-3000AE

Finds the minimum spark energy that ignites a dust cloud, for dust explosion safety.

Minimum Ignition Temperature Tester

1 product View all

Minimum Ignition Temperature Tester for Dust Clouds - MITC-1000AE

Determines the lowest surface temperature at which a dust cloud ignites.

Sieve Shaker

2 products View all

Vibratory Sieve Shaker - VS1100

Separates and measures particle size distribution with three-dimensional sieving motion.

Air Jet Sieve Shaker - JS1100

Air-jet sieving for fine, dry powders that clog or agglomerate on conventional sieves.

Pellet Press

2 products View all

Automatic Pellet Press - LP40T

Presses powders into uniform pellets for XRF and other analysis, with repeatable pressure.

Automatic Pellet Press - PP40

Presses powders into uniform pellets for XRF and other analysis, with repeatable pressure.

Rotary Sample Divider

1 product View all

Rotary Sample Divider - RSD Series

Splits bulk samples into representative sub-samples for consistent, reliable analysis.

Sample Splitter

1 product View all

Sample Splitter - SS

Riffle division of granular materials into equal, representative portions.

Glass Fusion Furnace

1 product View all

Glass Fusion Furnace - PGLS Series

Fuses samples with flux into glass beads for highly accurate XRF analysis.

Jaw Crusher

5 products View all

Jaw Crusher - JC1000

Coarse and primary crushing of hard, brittle rocks, ores and minerals ahead of fine grinding.

Jaw Crusher - JC1100

Coarse and primary crushing of hard, brittle rocks, ores and minerals ahead of fine grinding.

Jaw Crusher - JC1200

Coarse and primary crushing of hard, brittle rocks, ores and minerals ahead of fine grinding.

Jaw Crusher - JC1300

Coarse and primary crushing of hard, brittle rocks, ores and minerals ahead of fine grinding.

Jaw Crusher - JC1000–JC1300

Coarse and primary crushing of hard, brittle rocks, ores and minerals ahead of fine grinding.

Advanced Materials

17 products View all

Planetary Nano Ball Mill - BM2200+

Grinds and mixes powders down to the nanometre range, for advanced materials research and sample preparation.

High Energy Ball Mill - MM1600

High-impact milling for fast size reduction, mechanical alloying and the synthesis of new materials.

Planetary Ball Mill - BM 1500+ Series

Fine grinding, mixing and homogenising of hard, brittle and fibrous samples, wet or dry.

Planetary Ball Mill - BM1150+

Fine grinding, mixing and homogenising of hard, brittle and fibrous samples, wet or dry.

Planetary Ball Mill - BM 1100+

Fine grinding, mixing and homogenising of hard, brittle and fibrous samples, wet or dry.

Planetary Ball Mill - BM 1200+

Fine grinding, mixing and homogenising of hard, brittle and fibrous samples, wet or dry.

Planetary Ball Mill - BM 1400+

Fine grinding, mixing and homogenising of hard, brittle and fibrous samples, wet or dry.

Cryogenic Ball Mill - CM1100

Grinds tough, elastic and temperature-sensitive samples under liquid-nitrogen cooling, keeping them intact.

Graphite Furnace - GRF

Ultra-high-temperature processing in an inert or vacuum atmosphere using graphite heating elements.

Vacuum Furnace - PVAC

Heat treatment, sintering and brazing under vacuum to prevent oxidation and contamination.

Atmosphere Controlled Furnace - ACF Series

Heat treatment under inert or reducing gases for oxidation-free sintering and annealing.

Modular Tube Furnace - MTF

A configurable tube furnace for annealing, synthesis and controlled-atmosphere work.

Modular Split Tube Furnace - ASP

A hinged tube furnace that opens for fast loading and cooling of tubes and reactors.

ElvaX Plus XRF Benchtop Spectrometer

Benchtop XRF for fast, non-destructive elemental analysis of metals, minerals and powders.

ElvaX Pro XRF Benchtop Spectrometer

Benchtop XRF with extended range and sensitivity for demanding elemental analysis.

ICP-OES - ICP 5000 DV

Measures many elements at trace levels in a single run, for environmental, food and materials testing.

ICP-MS - ICP-MS 5500

Ultra-trace and isotopic elemental measurement for the most demanding quality and research work.

Aerospace

14 products View all

Vacuum Furnace - PVAC

Heat treatment, sintering and brazing under vacuum to prevent oxidation and contamination.

Atmosphere Controlled Furnace - ACF Series

Heat treatment under inert or reducing gases for oxidation-free sintering and annealing.

ElvaX Plus XRF Benchtop Spectrometer

Benchtop XRF for fast, non-destructive elemental analysis of metals, minerals and powders.

ElvaX Pro XRF Benchtop Spectrometer

Benchtop XRF with extended range and sensitivity for demanding elemental analysis.

ICP-OES - ICP 5000 DV

Measures many elements at trace levels in a single run, for environmental, food and materials testing.

ICP-MS - ICP-MS 5500

Ultra-trace and isotopic elemental measurement for the most demanding quality and research work.

Prospector 2 XRF Handheld Spectrometer

Handheld XRF for on-the-spot alloy identification, scrap sorting and precious metal testing.

Prospector 3 Handheld XRF Spectrometer

Portable XRF for rapid elemental analysis in the field, at the scrapyard or on the shop floor.

Optical Emission Spectrometer (OES) - LABSPECTRO

Spark OES for fast, precise composition analysis of metals and alloys in production control.

Optical Emission Spectrometer (OES) - LABSPECTRO PRO

Spark OES for fast, precise composition analysis of metals and alloys in production control.

High Temperature Chamber Furnace - MoS Series

Box furnace for sintering, ceramics and material testing at very high temperatures.

Heat Treatment Furnace - HDF Series

Hardening, tempering and annealing of metal parts with precise temperature control.

Heat Treatment Furnace - HLF Series

Hardening, tempering and annealing of metal parts with precise temperature control.

Multi-Zone Tube Furnace - PZF Series

Independently controlled heating zones for uniform or graded temperature profiles along the tube.

Agriculture & Fertilizers

18 products View all

High Energy Ball Mill - MM1600

High-impact milling for fast size reduction, mechanical alloying and the synthesis of new materials.

Cryogenic Ball Mill - CM1100

Grinds tough, elastic and temperature-sensitive samples under liquid-nitrogen cooling, keeping them intact.

ICP-OES - ICP 5000 DV

Measures many elements at trace levels in a single run, for environmental, food and materials testing.

ICP-MS - ICP-MS 5500

Ultra-trace and isotopic elemental measurement for the most demanding quality and research work.

CHN Elemental Analyser - LCHN3600

Determines carbon, hydrogen and nitrogen content in organic and inorganic samples.

Automatic Proximate Analyzer (TGA) - LPA4000

Automatically measures moisture, volatile matter, ash and fixed carbon in coal and biomass.

Infrared Carbon Sulfur Analyser - LCS 3500

Measures carbon and sulfur in steel, iron, alloys, ores and other inorganic materials.

IR Sulfur Analyser - LS3000/IR

Infrared determination of total sulfur in coal, coke, oils and other fuels.

Micro Ball Mill - MM1100

Quick grinding and homogenising of small sample volumes, ideal for routine laboratory preparation.

Cutting Mill - C10

Cuts soft, fibrous and heterogeneous materials such as plant matter, plastics and waste into uniform particles.

Cutting Mill - C25

Cuts soft, fibrous and heterogeneous materials such as plant matter, plastics and waste into uniform particles.

Cutting Mill - C90

Cuts soft, fibrous and heterogeneous materials such as plant matter, plastics and waste into uniform particles.

Hammer Mill - HM 1100

Impact grinding of brittle materials like grain, coal and minerals into consistent particle sizes.

Knife Mill - KM1100

Homogenises food, feed and moist samples with rotating blades for representative analysis.

Knife Mill - KM1300

Homogenises food, feed and moist samples with rotating blades for representative analysis.

Ultra Centrifugal Mill - UCM1100

Rapid, gentle fine grinding of soft to medium-hard materials with minimal heat build-up.

Vibratory Sieve Shaker - VS1100

Separates and measures particle size distribution with three-dimensional sieving motion.

Air Jet Sieve Shaker - JS1100

Air-jet sieving for fine, dry powders that clog or agglomerate on conventional sieves.

Assay & Testing Laboratories

23 products View all

ElvaX Plus XRF Benchtop Spectrometer

Benchtop XRF for fast, non-destructive elemental analysis of metals, minerals and powders.

ElvaX Pro XRF Benchtop Spectrometer

Benchtop XRF with extended range and sensitivity for demanding elemental analysis.

ICP-OES - ICP 5000 DV

Measures many elements at trace levels in a single run, for environmental, food and materials testing.

ICP-MS - ICP-MS 5500

Ultra-trace and isotopic elemental measurement for the most demanding quality and research work.

Prospector 2 XRF Handheld Spectrometer

Handheld XRF for on-the-spot alloy identification, scrap sorting and precious metal testing.

Prospector 3 Handheld XRF Spectrometer

Portable XRF for rapid elemental analysis in the field, at the scrapyard or on the shop floor.

Optical Emission Spectrometer (OES) - LABSPECTRO

Spark OES for fast, precise composition analysis of metals and alloys in production control.

Optical Emission Spectrometer (OES) - LABSPECTRO PRO

Spark OES for fast, precise composition analysis of metals and alloys in production control.

CHN Elemental Analyser - LCHN3600

Determines carbon, hydrogen and nitrogen content in organic and inorganic samples.

Automatic Proximate Analyzer (TGA) - LPA4000

Automatically measures moisture, volatile matter, ash and fixed carbon in coal and biomass.

Infrared Carbon Sulfur Analyser - LCS 3500

Measures carbon and sulfur in steel, iron, alloys, ores and other inorganic materials.

IR Sulfur Analyser - LS3000/IR

Infrared determination of total sulfur in coal, coke, oils and other fuels.

Bomb Calorimeter - BCI-2000

Measures the gross calorific value of coal, fuels, biomass and food samples.

Ball Mill

Cutting Mill

Hammer Mill

Knife Mill

Ultra Centrifugal Mill

Vibratory Disc Mill

Disc Mill

Mortar Grinder

Cyclone Mill

Graphite Furnace

Vacuum Furnace

Atmosphere Controlled Furnace

Modular Tube Furnace

Modular Split Tube Furnace

High Temperature Chamber Furnace

Heat Treatment Furnace

Multi-Zone Tube Furnace

Chamber Furnace

Split Tube Furnace

Tube Furnace

Ash Fusion Furnace

Ashing Furnace

Asphalt Chamber Furnace

Chamber Furnace Eco

MoS Series Chamber Furnace

Furnaces

XRF Analyzer

ICP-OES

ICP-MS

Spark OES

CHN Elemental Analyzer

Carbon Sulfur Analyzer

IR Sulfur Analyzer

Proximate Analyzer

Bomb Calorimeter

Coal Quality Analyzer

Flash Point Tester

Vapor Pressure Tester

Explosion Tester

Minimum Ignition Energy Tester

Minimum Ignition Temperature Tester

Sieve Shaker

Pellet Press

Rotary Sample Divider

Sample Splitter

Glass Fusion Furnace

Jaw Crusher

Advanced Materials

Aerospace

Agriculture & Fertilizers

Assay & Testing Laboratories

Automotive & Engineering

Battery & Energy Materials

Biomass & Renewable Energy

Bitumen & Asphalt

Cement & Construction Materials

Ceramics & Glass

Chemical & Specialty Chemicals

Coal & Power

Electronics & Semiconductors

Environmental Testing

Food & Beverage

Food & Feed

Foundries & Casting

Fuels & Lubricants

Geology & Exploration

Metals & Steel

Mining & Minerals

Non-Ferrous Metals

Oil & Gas / Petrochemicals

Petroleum & Petrochemicals

Pharmaceuticals

Plastics & Polymers

Powders & Advanced Materials

Precious Metals & Jewelry

Research & Testing Laboratories

Roads & Infrastructure

Scrap & Recycling

Water & Wastewater

Sample Preparation