Grinds and mixes powders down to the nanometre range, for advanced materials research and sample preparation.

High-impact milling for fast size reduction, mechanical alloying and the synthesis of new materials.

Fine grinding, mixing and homogenising of hard, brittle and fibrous samples, wet or dry.

Fine grinding, mixing and homogenising of hard, brittle and fibrous samples, wet or dry.

Fine grinding, mixing and homogenising of hard, brittle and fibrous samples, wet or dry.

Fine grinding, mixing and homogenising of hard, brittle and fibrous samples, wet or dry.

Fine grinding, mixing and homogenising of hard, brittle and fibrous samples, wet or dry.

Grinds tough, elastic and temperature-sensitive samples under liquid-nitrogen cooling, keeping them intact.

Ultra-high-temperature processing in an inert or vacuum atmosphere using graphite heating elements.

Heat treatment, sintering and brazing under vacuum to prevent oxidation and contamination.

Heat treatment under inert or reducing gases for oxidation-free sintering and annealing.

A configurable tube furnace for annealing, synthesis and controlled-atmosphere work.

A hinged tube furnace that opens for fast loading and cooling of tubes and reactors.

Benchtop XRF for fast, non-destructive elemental analysis of metals, minerals and powders.

Benchtop XRF with extended range and sensitivity for demanding elemental analysis.

Measures many elements at trace levels in a single run, for environmental, food and materials testing.

Ultra-trace and isotopic elemental measurement for the most demanding quality and research work.

Heat treatment, sintering and brazing under vacuum to prevent oxidation and contamination.

Heat treatment under inert or reducing gases for oxidation-free sintering and annealing.

Benchtop XRF for fast, non-destructive elemental analysis of metals, minerals and powders.

Benchtop XRF with extended range and sensitivity for demanding elemental analysis.

Measures many elements at trace levels in a single run, for environmental, food and materials testing.

Ultra-trace and isotopic elemental measurement for the most demanding quality and research work.

Handheld XRF for on-the-spot alloy identification, scrap sorting and precious metal testing.

Portable XRF for rapid elemental analysis in the field, at the scrapyard or on the shop floor.

Spark OES for fast, precise composition analysis of metals and alloys in production control.

Spark OES for fast, precise composition analysis of metals and alloys in production control.

Box furnace for sintering, ceramics and material testing at very high temperatures.

Hardening, tempering and annealing of metal parts with precise temperature control.

Hardening, tempering and annealing of metal parts with precise temperature control.

Independently controlled heating zones for uniform or graded temperature profiles along the tube.

High-impact milling for fast size reduction, mechanical alloying and the synthesis of new materials.

Grinds tough, elastic and temperature-sensitive samples under liquid-nitrogen cooling, keeping them intact.

Measures many elements at trace levels in a single run, for environmental, food and materials testing.

Ultra-trace and isotopic elemental measurement for the most demanding quality and research work.

Determines carbon, hydrogen and nitrogen content in organic and inorganic samples.

Automatically measures moisture, volatile matter, ash and fixed carbon in coal and biomass.

Measures carbon and sulfur in steel, iron, alloys, ores and other inorganic materials.

Infrared determination of total sulfur in coal, coke, oils and other fuels.

Quick grinding and homogenising of small sample volumes, ideal for routine laboratory preparation.

Cuts soft, fibrous and heterogeneous materials such as plant matter, plastics and waste into uniform particles.

Cuts soft, fibrous and heterogeneous materials such as plant matter, plastics and waste into uniform particles.

Cuts soft, fibrous and heterogeneous materials such as plant matter, plastics and waste into uniform particles.

Impact grinding of brittle materials like grain, coal and minerals into consistent particle sizes.

Homogenises food, feed and moist samples with rotating blades for representative analysis.

Homogenises food, feed and moist samples with rotating blades for representative analysis.

Rapid, gentle fine grinding of soft to medium-hard materials with minimal heat build-up.

Separates and measures particle size distribution with three-dimensional sieving motion.

Air-jet sieving for fine, dry powders that clog or agglomerate on conventional sieves.

Benchtop XRF for fast, non-destructive elemental analysis of metals, minerals and powders.

Benchtop XRF with extended range and sensitivity for demanding elemental analysis.

Measures many elements at trace levels in a single run, for environmental, food and materials testing.

Ultra-trace and isotopic elemental measurement for the most demanding quality and research work.

Handheld XRF for on-the-spot alloy identification, scrap sorting and precious metal testing.

Portable XRF for rapid elemental analysis in the field, at the scrapyard or on the shop floor.

Spark OES for fast, precise composition analysis of metals and alloys in production control.

Spark OES for fast, precise composition analysis of metals and alloys in production control.

Determines carbon, hydrogen and nitrogen content in organic and inorganic samples.

Automatically measures moisture, volatile matter, ash and fixed carbon in coal and biomass.

Measures carbon and sulfur in steel, iron, alloys, ores and other inorganic materials.

Infrared determination of total sulfur in coal, coke, oils and other fuels.

Measures the gross calorific value of coal, fuels, biomass and food samples.

Automated calorific value testing with less operator time for busy fuel laboratories.

Fully automated calorific value measurement for high-throughput fuel testing.

Presses powders into uniform pellets for XRF and other analysis, with repeatable pressure.

Presses powders into uniform pellets for XRF and other analysis, with repeatable pressure.

Splits bulk samples into representative sub-samples for consistent, reliable analysis.

Riffle division of granular materials into equal, representative portions.

Coarse and primary crushing of hard, brittle rocks, ores and minerals ahead of fine grinding.

Coarse and primary crushing of hard, brittle rocks, ores and minerals ahead of fine grinding.

Coarse and primary crushing of hard, brittle rocks, ores and minerals ahead of fine grinding.

Coarse and primary crushing of hard, brittle rocks, ores and minerals ahead of fine grinding.

High-impact milling for fast size reduction, mechanical alloying and the synthesis of new materials.

Grinds tough, elastic and temperature-sensitive samples under liquid-nitrogen cooling, keeping them intact.

Heat treatment, sintering and brazing under vacuum to prevent oxidation and contamination.

Benchtop XRF for fast, non-destructive elemental analysis of metals, minerals and powders.

Benchtop XRF with extended range and sensitivity for demanding elemental analysis.

Measures many elements at trace levels in a single run, for environmental, food and materials testing.

Ultra-trace and isotopic elemental measurement for the most demanding quality and research work.

Handheld XRF for on-the-spot alloy identification, scrap sorting and precious metal testing.

Portable XRF for rapid elemental analysis in the field, at the scrapyard or on the shop floor.

Spark OES for fast, precise composition analysis of metals and alloys in production control.

Spark OES for fast, precise composition analysis of metals and alloys in production control.

Hardening, tempering and annealing of metal parts with precise temperature control.

Hardening, tempering and annealing of metal parts with precise temperature control.

Quick grinding and homogenising of small sample volumes, ideal for routine laboratory preparation.

Coarse and primary crushing of hard, brittle rocks, ores and minerals ahead of fine grinding.

A general-purpose muffle furnace for ashing, drying and heat treatment in the laboratory.

A general-purpose muffle furnace for ashing, drying and heat treatment in the laboratory.

Pulverises hard, brittle samples such as ores, rocks and slag to analytical fineness in minutes.

Pulverises hard, brittle samples such as ores, rocks and slag to analytical fineness in minutes.

Pulverises hard, brittle samples such as ores, rocks and slag to analytical fineness in minutes.

Grinds and mixes powders down to the nanometre range, for advanced materials research and sample preparation.

High-impact milling for fast size reduction, mechanical alloying and the synthesis of new materials.

Fine grinding, mixing and homogenising of hard, brittle and fibrous samples, wet or dry.

Fine grinding, mixing and homogenising of hard, brittle and fibrous samples, wet or dry.

Fine grinding, mixing and homogenising of hard, brittle and fibrous samples, wet or dry.

Fine grinding, mixing and homogenising of hard, brittle and fibrous samples, wet or dry.

Fine grinding, mixing and homogenising of hard, brittle and fibrous samples, wet or dry.

Grinds tough, elastic and temperature-sensitive samples under liquid-nitrogen cooling, keeping them intact.

Heat treatment, sintering and brazing under vacuum to prevent oxidation and contamination.

Heat treatment under inert or reducing gases for oxidation-free sintering and annealing.

A configurable tube furnace for annealing, synthesis and controlled-atmosphere work.

A hinged tube furnace that opens for fast loading and cooling of tubes and reactors.

Benchtop XRF for fast, non-destructive elemental analysis of metals, minerals and powders.

Benchtop XRF with extended range and sensitivity for demanding elemental analysis.

Measures many elements at trace levels in a single run, for environmental, food and materials testing.

Ultra-trace and isotopic elemental measurement for the most demanding quality and research work.

Spark OES for fast, precise composition analysis of metals and alloys in production control.

Independently controlled heating zones for uniform or graded temperature profiles along the tube.

Opens along its length to place and remove tubes quickly, ideal for reactor setups.

Heats samples in a tube under air, vacuum or controlled gas for synthesis and annealing.

Heats samples in a tube under air, vacuum or controlled gas for synthesis and annealing.

Determines carbon, hydrogen and nitrogen content in organic and inorganic samples.

Automatically measures moisture, volatile matter, ash and fixed carbon in coal and biomass.

Measures carbon and sulfur in steel, iron, alloys, ores and other inorganic materials.

Infrared determination of total sulfur in coal, coke, oils and other fuels.

Cuts soft, fibrous and heterogeneous materials such as plant matter, plastics and waste into uniform particles.

Cuts soft, fibrous and heterogeneous materials such as plant matter, plastics and waste into uniform particles.

Cuts soft, fibrous and heterogeneous materials such as plant matter, plastics and waste into uniform particles.

Impact grinding of brittle materials like grain, coal and minerals into consistent particle sizes.

Homogenises food, feed and moist samples with rotating blades for representative analysis.

Homogenises food, feed and moist samples with rotating blades for representative analysis.

Separates and measures particle size distribution with three-dimensional sieving motion.

Measures the gross calorific value of coal, fuels, biomass and food samples.

Automated calorific value testing with less operator time for busy fuel laboratories.

Fully automated calorific value measurement for high-throughput fuel testing.

Coarse and primary crushing of hard, brittle rocks, ores and minerals ahead of fine grinding.

Portable testing of coal quality parameters at mines, ports and power plants.

Determines the ash fusion temperatures of coal, coke and biomass to predict slagging behaviour.

Burns off organic matter to measure ash content in coal, food, feed and polymers.

Benchtop XRF for fast, non-destructive elemental analysis of metals, minerals and powders.

Benchtop XRF with extended range and sensitivity for demanding elemental analysis.

Cuts soft, fibrous and heterogeneous materials such as plant matter, plastics and waste into uniform particles.

Cuts soft, fibrous and heterogeneous materials such as plant matter, plastics and waste into uniform particles.

Cuts soft, fibrous and heterogeneous materials such as plant matter, plastics and waste into uniform particles.

Separates and measures particle size distribution with three-dimensional sieving motion.

Measures the gross calorific value of coal, fuels, biomass and food samples.

Automated calorific value testing with less operator time for busy fuel laboratories.

Fully automated calorific value measurement for high-throughput fuel testing.

Coarse and primary crushing of hard, brittle rocks, ores and minerals ahead of fine grinding.

Pulverises hard, brittle samples such as ores, rocks and slag to analytical fineness in minutes.

Ignition-method furnace for measuring binder content in asphalt mixtures.

Determines the closed-cup flash point of fuels and solvents using small sample volumes.

Measures the vapour pressure of fuels and volatile liquids for quality and safety compliance.

Benchtop XRF for fast, non-destructive elemental analysis of metals, minerals and powders.

Benchtop XRF with extended range and sensitivity for demanding elemental analysis.

Spark OES for fast, precise composition analysis of metals and alloys in production control.

Spark OES for fast, precise composition analysis of metals and alloys in production control.

Independently controlled heating zones for uniform or graded temperature profiles along the tube.

Impact grinding of brittle materials like grain, coal and minerals into consistent particle sizes.

Presses powders into uniform pellets for XRF and other analysis, with repeatable pressure.

Presses powders into uniform pellets for XRF and other analysis, with repeatable pressure.

Splits bulk samples into representative sub-samples for consistent, reliable analysis.

Riffle division of granular materials into equal, representative portions.

Coarse and primary crushing of hard, brittle rocks, ores and minerals ahead of fine grinding.

Coarse and primary crushing of hard, brittle rocks, ores and minerals ahead of fine grinding.

Coarse and primary crushing of hard, brittle rocks, ores and minerals ahead of fine grinding.

Coarse and primary crushing of hard, brittle rocks, ores and minerals ahead of fine grinding.

A general-purpose muffle furnace for ashing, drying and heat treatment in the laboratory.

Pulverises hard, brittle samples such as ores, rocks and slag to analytical fineness in minutes.

Pulverises hard, brittle samples such as ores, rocks and slag to analytical fineness in minutes.

Pulverises hard, brittle samples such as ores, rocks and slag to analytical fineness in minutes.

Heats samples in a tube under air, vacuum or controlled gas for synthesis and annealing.

Heats samples in a tube under air, vacuum or controlled gas for synthesis and annealing.

Burns off organic matter to measure ash content in coal, food, feed and polymers.

Continuous fine grinding of hard and brittle materials between rotating discs.

Reliable grinding and mixing of minerals, ores, soils and powders ahead of analysis.

Ultra-high-temperature processing in an inert or vacuum atmosphere using graphite heating elements.

Heat treatment, sintering and brazing under vacuum to prevent oxidation and contamination.

Heat treatment under inert or reducing gases for oxidation-free sintering and annealing.

Benchtop XRF for fast, non-destructive elemental analysis of metals, minerals and powders.

Benchtop XRF with extended range and sensitivity for demanding elemental analysis.

Measures many elements at trace levels in a single run, for environmental, food and materials testing.

Box furnace for sintering, ceramics and material testing at very high temperatures.

Independently controlled heating zones for uniform or graded temperature profiles along the tube.

A general-purpose muffle furnace for ashing, drying and heat treatment in the laboratory.

Pulverises hard, brittle samples such as ores, rocks and slag to analytical fineness in minutes.

Heats samples in a tube under air, vacuum or controlled gas for synthesis and annealing.

Heats samples in a tube under air, vacuum or controlled gas for synthesis and annealing.

Reliable grinding and mixing of minerals, ores, soils and powders ahead of analysis.

Fuses samples with flux into glass beads for highly accurate XRF analysis.

An economical chamber furnace for everyday ashing, drying and heat treatment.

High-temperature chamber furnace with molybdenum disilicide elements for ceramics and sintering.

Grinds, mixes and triturates powders and pastes, reproducing manual mortar work consistently.

Heat treatment, sintering and brazing under vacuum to prevent oxidation and contamination.

Benchtop XRF for fast, non-destructive elemental analysis of metals, minerals and powders.

Benchtop XRF with extended range and sensitivity for demanding elemental analysis.

Measures many elements at trace levels in a single run, for environmental, food and materials testing.

Ultra-trace and isotopic elemental measurement for the most demanding quality and research work.

Spark OES for fast, precise composition analysis of metals and alloys in production control.

Spark OES for fast, precise composition analysis of metals and alloys in production control.

Determines carbon, hydrogen and nitrogen content in organic and inorganic samples.

Measures carbon and sulfur in steel, iron, alloys, ores and other inorganic materials.

Infrared determination of total sulfur in coal, coke, oils and other fuels.

Cuts soft, fibrous and heterogeneous materials such as plant matter, plastics and waste into uniform particles.

Heats samples in a tube under air, vacuum or controlled gas for synthesis and annealing.

Determines the closed-cup flash point of fuels and solvents using small sample volumes.

Measures the vapour pressure of fuels and volatile liquids for quality and safety compliance.

Reliable grinding and mixing of minerals, ores, soils and powders ahead of analysis.

Studies thermal runaway and reaction hazards for process safety and battery testing.

Measures the heat released by chemical reactions to support safe process scale-up.

Assesses the explosion severity of combustible dusts in a 20-litre sphere.

Finds the minimum spark energy that ignites a dust cloud, for dust explosion safety.

Determines the lowest surface temperature at which a dust cloud ignites.

Determines carbon, hydrogen and nitrogen content in organic and inorganic samples.

Automatically measures moisture, volatile matter, ash and fixed carbon in coal and biomass.

Measures carbon and sulfur in steel, iron, alloys, ores and other inorganic materials.

Infrared determination of total sulfur in coal, coke, oils and other fuels.

Impact grinding of brittle materials like grain, coal and minerals into consistent particle sizes.

Separates and measures particle size distribution with three-dimensional sieving motion.

Measures the gross calorific value of coal, fuels, biomass and food samples.

Automated calorific value testing with less operator time for busy fuel laboratories.

Fully automated calorific value measurement for high-throughput fuel testing.

Splits bulk samples into representative sub-samples for consistent, reliable analysis.

Riffle division of granular materials into equal, representative portions.

Coarse and primary crushing of hard, brittle rocks, ores and minerals ahead of fine grinding.

Coarse and primary crushing of hard, brittle rocks, ores and minerals ahead of fine grinding.

Coarse and primary crushing of hard, brittle rocks, ores and minerals ahead of fine grinding.

Coarse and primary crushing of hard, brittle rocks, ores and minerals ahead of fine grinding.

Pulverises hard, brittle samples such as ores, rocks and slag to analytical fineness in minutes.

Portable testing of coal quality parameters at mines, ports and power plants.

Determines the ash fusion temperatures of coal, coke and biomass to predict slagging behaviour.

Burns off organic matter to measure ash content in coal, food, feed and polymers.

Continuous fine grinding of hard and brittle materials between rotating discs.

Grinds tough, elastic and temperature-sensitive samples under liquid-nitrogen cooling, keeping them intact.

Ultra-high-temperature processing in an inert or vacuum atmosphere using graphite heating elements.

Heat treatment, sintering and brazing under vacuum to prevent oxidation and contamination.

Heat treatment under inert or reducing gases for oxidation-free sintering and annealing.

A configurable tube furnace for annealing, synthesis and controlled-atmosphere work.

A hinged tube furnace that opens for fast loading and cooling of tubes and reactors.

Benchtop XRF for fast, non-destructive elemental analysis of metals, minerals and powders.

Benchtop XRF with extended range and sensitivity for demanding elemental analysis.

Measures many elements at trace levels in a single run, for environmental, food and materials testing.

Ultra-trace and isotopic elemental measurement for the most demanding quality and research work.

Handheld XRF for on-the-spot alloy identification, scrap sorting and precious metal testing.

Portable XRF for rapid elemental analysis in the field, at the scrapyard or on the shop floor.

Spark OES for fast, precise composition analysis of metals and alloys in production control.

Spark OES for fast, precise composition analysis of metals and alloys in production control.

Box furnace for sintering, ceramics and material testing at very high temperatures.

Rapid, gentle fine grinding of soft to medium-hard materials with minimal heat build-up.

Opens along its length to place and remove tubes quickly, ideal for reactor setups.

Grinds, mixes and triturates powders and pastes, reproducing manual mortar work consistently.

Benchtop XRF for fast, non-destructive elemental analysis of metals, minerals and powders.

Benchtop XRF with extended range and sensitivity for demanding elemental analysis.

Measures many elements at trace levels in a single run, for environmental, food and materials testing.

Ultra-trace and isotopic elemental measurement for the most demanding quality and research work.

Handheld XRF for on-the-spot alloy identification, scrap sorting and precious metal testing.

Portable XRF for rapid elemental analysis in the field, at the scrapyard or on the shop floor.

Determines carbon, hydrogen and nitrogen content in organic and inorganic samples.

Automatically measures moisture, volatile matter, ash and fixed carbon in coal and biomass.

Measures carbon and sulfur in steel, iron, alloys, ores and other inorganic materials.

Infrared determination of total sulfur in coal, coke, oils and other fuels.

Cuts soft, fibrous and heterogeneous materials such as plant matter, plastics and waste into uniform particles.

Cuts soft, fibrous and heterogeneous materials such as plant matter, plastics and waste into uniform particles.

Cuts soft, fibrous and heterogeneous materials such as plant matter, plastics and waste into uniform particles.

Homogenises food, feed and moist samples with rotating blades for representative analysis.

Homogenises food, feed and moist samples with rotating blades for representative analysis.

Separates and measures particle size distribution with three-dimensional sieving motion.

Air-jet sieving for fine, dry powders that clog or agglomerate on conventional sieves.

Coarse and primary crushing of hard, brittle rocks, ores and minerals ahead of fine grinding.

Portable testing of coal quality parameters at mines, ports and power plants.

Measures many elements at trace levels in a single run, for environmental, food and materials testing.

Ultra-trace and isotopic elemental measurement for the most demanding quality and research work.

Determines carbon, hydrogen and nitrogen content in organic and inorganic samples.

Automatically measures moisture, volatile matter, ash and fixed carbon in coal and biomass.

Cuts soft, fibrous and heterogeneous materials such as plant matter, plastics and waste into uniform particles.

Homogenises food, feed and moist samples with rotating blades for representative analysis.

Rapid, gentle fine grinding of soft to medium-hard materials with minimal heat build-up.

Separates and measures particle size distribution with three-dimensional sieving motion.

Air-jet sieving for fine, dry powders that clog or agglomerate on conventional sieves.

Measures the gross calorific value of coal, fuels, biomass and food samples.

Automated calorific value testing with less operator time for busy fuel laboratories.

Fully automated calorific value measurement for high-throughput fuel testing.

Reliable grinding and mixing of minerals, ores, soils and powders ahead of analysis.

Grinds, mixes and triturates powders and pastes, reproducing manual mortar work consistently.

Fast grinding of grain, feed and food with cyclone separation, suited to NIR and nutrient analysis.

Measures many elements at trace levels in a single run, for environmental, food and materials testing.

Ultra-trace and isotopic elemental measurement for the most demanding quality and research work.

Determines carbon, hydrogen and nitrogen content in organic and inorganic samples.

Automatically measures moisture, volatile matter, ash and fixed carbon in coal and biomass.

Cuts soft, fibrous and heterogeneous materials such as plant matter, plastics and waste into uniform particles.

Impact grinding of brittle materials like grain, coal and minerals into consistent particle sizes.

Homogenises food, feed and moist samples with rotating blades for representative analysis.

Rapid, gentle fine grinding of soft to medium-hard materials with minimal heat build-up.

Separates and measures particle size distribution with three-dimensional sieving motion.

Air-jet sieving for fine, dry powders that clog or agglomerate on conventional sieves.

Measures the gross calorific value of coal, fuels, biomass and food samples.

Automated calorific value testing with less operator time for busy fuel laboratories.

Fully automated calorific value measurement for high-throughput fuel testing.

Reliable grinding and mixing of minerals, ores, soils and powders ahead of analysis.

Fast grinding of grain, feed and food with cyclone separation, suited to NIR and nutrient analysis.

Ultra-high-temperature processing in an inert or vacuum atmosphere using graphite heating elements.

Heat treatment, sintering and brazing under vacuum to prevent oxidation and contamination.

Heat treatment under inert or reducing gases for oxidation-free sintering and annealing.

Benchtop XRF for fast, non-destructive elemental analysis of metals, minerals and powders.

Benchtop XRF with extended range and sensitivity for demanding elemental analysis.

Measures many elements at trace levels in a single run, for environmental, food and materials testing.

Ultra-trace and isotopic elemental measurement for the most demanding quality and research work.

Handheld XRF for on-the-spot alloy identification, scrap sorting and precious metal testing.

Portable XRF for rapid elemental analysis in the field, at the scrapyard or on the shop floor.

Spark OES for fast, precise composition analysis of metals and alloys in production control.

Spark OES for fast, precise composition analysis of metals and alloys in production control.

Box furnace for sintering, ceramics and material testing at very high temperatures.

Hardening, tempering and annealing of metal parts with precise temperature control.

Hardening, tempering and annealing of metal parts with precise temperature control.

Coarse and primary crushing of hard, brittle rocks, ores and minerals ahead of fine grinding.

A general-purpose muffle furnace for ashing, drying and heat treatment in the laboratory.

Pulverises hard, brittle samples such as ores, rocks and slag to analytical fineness in minutes.

Benchtop XRF for fast, non-destructive elemental analysis of metals, minerals and powders.

Benchtop XRF with extended range and sensitivity for demanding elemental analysis.

Measures many elements at trace levels in a single run, for environmental, food and materials testing.

Ultra-trace and isotopic elemental measurement for the most demanding quality and research work.

Spark OES for fast, precise composition analysis of metals and alloys in production control.

Spark OES for fast, precise composition analysis of metals and alloys in production control.

Determines carbon, hydrogen and nitrogen content in organic and inorganic samples.

Measures carbon and sulfur in steel, iron, alloys, ores and other inorganic materials.

Infrared determination of total sulfur in coal, coke, oils and other fuels.

Measures the gross calorific value of coal, fuels, biomass and food samples.

Automated calorific value testing with less operator time for busy fuel laboratories.

Fully automated calorific value measurement for high-throughput fuel testing.

Determines the closed-cup flash point of fuels and solvents using small sample volumes.

Measures the vapour pressure of fuels and volatile liquids for quality and safety compliance.

High-impact milling for fast size reduction, mechanical alloying and the synthesis of new materials.

Grinds tough, elastic and temperature-sensitive samples under liquid-nitrogen cooling, keeping them intact.

Benchtop XRF for fast, non-destructive elemental analysis of metals, minerals and powders.

Benchtop XRF with extended range and sensitivity for demanding elemental analysis.

Measures many elements at trace levels in a single run, for environmental, food and materials testing.

Ultra-trace and isotopic elemental measurement for the most demanding quality and research work.

Handheld XRF for on-the-spot alloy identification, scrap sorting and precious metal testing.

Portable XRF for rapid elemental analysis in the field, at the scrapyard or on the shop floor.

Spark OES for fast, precise composition analysis of metals and alloys in production control.

Spark OES for fast, precise composition analysis of metals and alloys in production control.

Quick grinding and homogenising of small sample volumes, ideal for routine laboratory preparation.

Separates and measures particle size distribution with three-dimensional sieving motion.

Presses powders into uniform pellets for XRF and other analysis, with repeatable pressure.

Presses powders into uniform pellets for XRF and other analysis, with repeatable pressure.

Splits bulk samples into representative sub-samples for consistent, reliable analysis.

Riffle division of granular materials into equal, representative portions.

Coarse and primary crushing of hard, brittle rocks, ores and minerals ahead of fine grinding.

Coarse and primary crushing of hard, brittle rocks, ores and minerals ahead of fine grinding.

Coarse and primary crushing of hard, brittle rocks, ores and minerals ahead of fine grinding.

Coarse and primary crushing of hard, brittle rocks, ores and minerals ahead of fine grinding.

Pulverises hard, brittle samples such as ores, rocks and slag to analytical fineness in minutes.

Continuous fine grinding of hard and brittle materials between rotating discs.

Grinds tough, elastic and temperature-sensitive samples under liquid-nitrogen cooling, keeping them intact.

Ultra-high-temperature processing in an inert or vacuum atmosphere using graphite heating elements.

Heat treatment, sintering and brazing under vacuum to prevent oxidation and contamination.

Heat treatment under inert or reducing gases for oxidation-free sintering and annealing.

Benchtop XRF for fast, non-destructive elemental analysis of metals, minerals and powders.

Benchtop XRF with extended range and sensitivity for demanding elemental analysis.

Measures many elements at trace levels in a single run, for environmental, food and materials testing.

Ultra-trace and isotopic elemental measurement for the most demanding quality and research work.

Handheld XRF for on-the-spot alloy identification, scrap sorting and precious metal testing.

Portable XRF for rapid elemental analysis in the field, at the scrapyard or on the shop floor.

Spark OES for fast, precise composition analysis of metals and alloys in production control.

Spark OES for fast, precise composition analysis of metals and alloys in production control.

Box furnace for sintering, ceramics and material testing at very high temperatures.

Hardening, tempering and annealing of metal parts with precise temperature control.

Hardening, tempering and annealing of metal parts with precise temperature control.

Coarse and primary crushing of hard, brittle rocks, ores and minerals ahead of fine grinding.

A general-purpose muffle furnace for ashing, drying and heat treatment in the laboratory.

Pulverises hard, brittle samples such as ores, rocks and slag to analytical fineness in minutes.

Benchtop XRF for fast, non-destructive elemental analysis of metals, minerals and powders.

Benchtop XRF with extended range and sensitivity for demanding elemental analysis.

Measures many elements at trace levels in a single run, for environmental, food and materials testing.

Ultra-trace and isotopic elemental measurement for the most demanding quality and research work.

Handheld XRF for on-the-spot alloy identification, scrap sorting and precious metal testing.

Portable XRF for rapid elemental analysis in the field, at the scrapyard or on the shop floor.

Spark OES for fast, precise composition analysis of metals and alloys in production control.

Spark OES for fast, precise composition analysis of metals and alloys in production control.

Impact grinding of brittle materials like grain, coal and minerals into consistent particle sizes.

Separates and measures particle size distribution with three-dimensional sieving motion.

Air-jet sieving for fine, dry powders that clog or agglomerate on conventional sieves.

Presses powders into uniform pellets for XRF and other analysis, with repeatable pressure.

Presses powders into uniform pellets for XRF and other analysis, with repeatable pressure.

Splits bulk samples into representative sub-samples for consistent, reliable analysis.

Riffle division of granular materials into equal, representative portions.

Coarse and primary crushing of hard, brittle rocks, ores and minerals ahead of fine grinding.

Coarse and primary crushing of hard, brittle rocks, ores and minerals ahead of fine grinding.

Coarse and primary crushing of hard, brittle rocks, ores and minerals ahead of fine grinding.

Coarse and primary crushing of hard, brittle rocks, ores and minerals ahead of fine grinding.

Pulverises hard, brittle samples such as ores, rocks and slag to analytical fineness in minutes.

Continuous fine grinding of hard and brittle materials between rotating discs.

Reliable grinding and mixing of minerals, ores, soils and powders ahead of analysis.

Grinds, mixes and triturates powders and pastes, reproducing manual mortar work consistently.

Ultra-high-temperature processing in an inert or vacuum atmosphere using graphite heating elements.

Heat treatment, sintering and brazing under vacuum to prevent oxidation and contamination.

Heat treatment under inert or reducing gases for oxidation-free sintering and annealing.

Benchtop XRF for fast, non-destructive elemental analysis of metals, minerals and powders.

Benchtop XRF with extended range and sensitivity for demanding elemental analysis.

Measures many elements at trace levels in a single run, for environmental, food and materials testing.

Ultra-trace and isotopic elemental measurement for the most demanding quality and research work.

Handheld XRF for on-the-spot alloy identification, scrap sorting and precious metal testing.

Portable XRF for rapid elemental analysis in the field, at the scrapyard or on the shop floor.

Spark OES for fast, precise composition analysis of metals and alloys in production control.

Spark OES for fast, precise composition analysis of metals and alloys in production control.

Hardening, tempering and annealing of metal parts with precise temperature control.

Hardening, tempering and annealing of metal parts with precise temperature control.

Coarse and primary crushing of hard, brittle rocks, ores and minerals ahead of fine grinding.

Pulverises hard, brittle samples such as ores, rocks and slag to analytical fineness in minutes.

Reliable grinding and mixing of minerals, ores, soils and powders ahead of analysis.

Benchtop XRF for fast, non-destructive elemental analysis of metals, minerals and powders.

Benchtop XRF with extended range and sensitivity for demanding elemental analysis.

Measures many elements at trace levels in a single run, for environmental, food and materials testing.

Ultra-trace and isotopic elemental measurement for the most demanding quality and research work.

Spark OES for fast, precise composition analysis of metals and alloys in production control.

Spark OES for fast, precise composition analysis of metals and alloys in production control.

Determines carbon, hydrogen and nitrogen content in organic and inorganic samples.

Measures carbon and sulfur in steel, iron, alloys, ores and other inorganic materials.

Infrared determination of total sulfur in coal, coke, oils and other fuels.

Measures the gross calorific value of coal, fuels, biomass and food samples.

Automated calorific value testing with less operator time for busy fuel laboratories.

Fully automated calorific value measurement for high-throughput fuel testing.

Heats samples in a tube under air, vacuum or controlled gas for synthesis and annealing.

Determines the closed-cup flash point of fuels and solvents using small sample volumes.

Measures the vapour pressure of fuels and volatile liquids for quality and safety compliance.

Benchtop XRF for fast, non-destructive elemental analysis of metals, minerals and powders.

Benchtop XRF with extended range and sensitivity for demanding elemental analysis.

Measures many elements at trace levels in a single run, for environmental, food and materials testing.

Ultra-trace and isotopic elemental measurement for the most demanding quality and research work.

Spark OES for fast, precise composition analysis of metals and alloys in production control.

Spark OES for fast, precise composition analysis of metals and alloys in production control.

Determines carbon, hydrogen and nitrogen content in organic and inorganic samples.

Measures carbon and sulfur in steel, iron, alloys, ores and other inorganic materials.

Infrared determination of total sulfur in coal, coke, oils and other fuels.

Measures the gross calorific value of coal, fuels, biomass and food samples.

Automated calorific value testing with less operator time for busy fuel laboratories.

Fully automated calorific value measurement for high-throughput fuel testing.

Heats samples in a tube under air, vacuum or controlled gas for synthesis and annealing.

Determines the closed-cup flash point of fuels and solvents using small sample volumes.

Measures the vapour pressure of fuels and volatile liquids for quality and safety compliance.

Grinds and mixes powders down to the nanometre range, for advanced materials research and sample preparation.

Grinds tough, elastic and temperature-sensitive samples under liquid-nitrogen cooling, keeping them intact.

Benchtop XRF for fast, non-destructive elemental analysis of metals, minerals and powders.

Benchtop XRF with extended range and sensitivity for demanding elemental analysis.

Measures many elements at trace levels in a single run, for environmental, food and materials testing.

Ultra-trace and isotopic elemental measurement for the most demanding quality and research work.

Quick grinding and homogenising of small sample volumes, ideal for routine laboratory preparation.

Cuts soft, fibrous and heterogeneous materials such as plant matter, plastics and waste into uniform particles.

Homogenises food, feed and moist samples with rotating blades for representative analysis.

Rapid, gentle fine grinding of soft to medium-hard materials with minimal heat build-up.

Separates and measures particle size distribution with three-dimensional sieving motion.

Air-jet sieving for fine, dry powders that clog or agglomerate on conventional sieves.

A general-purpose muffle furnace for ashing, drying and heat treatment in the laboratory.

Heats samples in a tube under air, vacuum or controlled gas for synthesis and annealing.

Reliable grinding and mixing of minerals, ores, soils and powders ahead of analysis.

An economical chamber furnace for everyday ashing, drying and heat treatment.

Grinds, mixes and triturates powders and pastes, reproducing manual mortar work consistently.

Fast grinding of grain, feed and food with cyclone separation, suited to NIR and nutrient analysis.

Grinds tough, elastic and temperature-sensitive samples under liquid-nitrogen cooling, keeping them intact.

Benchtop XRF for fast, non-destructive elemental analysis of metals, minerals and powders.

Benchtop XRF with extended range and sensitivity for demanding elemental analysis.

Measures many elements at trace levels in a single run, for environmental, food and materials testing.

Ultra-trace and isotopic elemental measurement for the most demanding quality and research work.

Determines carbon, hydrogen and nitrogen content in organic and inorganic samples.

Cuts soft, fibrous and heterogeneous materials such as plant matter, plastics and waste into uniform particles.

Cuts soft, fibrous and heterogeneous materials such as plant matter, plastics and waste into uniform particles.

Cuts soft, fibrous and heterogeneous materials such as plant matter, plastics and waste into uniform particles.

Impact grinding of brittle materials like grain, coal and minerals into consistent particle sizes.

Homogenises food, feed and moist samples with rotating blades for representative analysis.

Homogenises food, feed and moist samples with rotating blades for representative analysis.

Rapid, gentle fine grinding of soft to medium-hard materials with minimal heat build-up.

Separates and measures particle size distribution with three-dimensional sieving motion.

Air-jet sieving for fine, dry powders that clog or agglomerate on conventional sieves.

Reliable grinding and mixing of minerals, ores, soils and powders ahead of analysis.

Studies thermal runaway and reaction hazards for process safety and battery testing.

Measures the heat released by chemical reactions to support safe process scale-up.

Assesses the explosion severity of combustible dusts in a 20-litre sphere.

Finds the minimum spark energy that ignites a dust cloud, for dust explosion safety.

Determines the lowest surface temperature at which a dust cloud ignites.

Fast grinding of grain, feed and food with cyclone separation, suited to NIR and nutrient analysis.

Grinds and mixes powders down to the nanometre range, for advanced materials research and sample preparation.

High-impact milling for fast size reduction, mechanical alloying and the synthesis of new materials.

Fine grinding, mixing and homogenising of hard, brittle and fibrous samples, wet or dry.

Fine grinding, mixing and homogenising of hard, brittle and fibrous samples, wet or dry.

Fine grinding, mixing and homogenising of hard, brittle and fibrous samples, wet or dry.

Fine grinding, mixing and homogenising of hard, brittle and fibrous samples, wet or dry.

Fine grinding, mixing and homogenising of hard, brittle and fibrous samples, wet or dry.

Grinds tough, elastic and temperature-sensitive samples under liquid-nitrogen cooling, keeping them intact.

Quick grinding and homogenising of small sample volumes, ideal for routine laboratory preparation.

Rapid, gentle fine grinding of soft to medium-hard materials with minimal heat build-up.

Separates and measures particle size distribution with three-dimensional sieving motion.

Air-jet sieving for fine, dry powders that clog or agglomerate on conventional sieves.

Presses powders into uniform pellets for XRF and other analysis, with repeatable pressure.

Presses powders into uniform pellets for XRF and other analysis, with repeatable pressure.

Splits bulk samples into representative sub-samples for consistent, reliable analysis.

Riffle division of granular materials into equal, representative portions.

Coarse and primary crushing of hard, brittle rocks, ores and minerals ahead of fine grinding.

Pulverises hard, brittle samples such as ores, rocks and slag to analytical fineness in minutes.

Pulverises hard, brittle samples such as ores, rocks and slag to analytical fineness in minutes.

Pulverises hard, brittle samples such as ores, rocks and slag to analytical fineness in minutes.

Continuous fine grinding of hard and brittle materials between rotating discs.

Grinds, mixes and triturates powders and pastes, reproducing manual mortar work consistently.

Ultra-high-temperature processing in an inert or vacuum atmosphere using graphite heating elements.

Heat treatment, sintering and brazing under vacuum to prevent oxidation and contamination.

Benchtop XRF for fast, non-destructive elemental analysis of metals, minerals and powders.

Benchtop XRF with extended range and sensitivity for demanding elemental analysis.

Measures many elements at trace levels in a single run, for environmental, food and materials testing.

Ultra-trace and isotopic elemental measurement for the most demanding quality and research work.

Handheld XRF for on-the-spot alloy identification, scrap sorting and precious metal testing.

Portable XRF for rapid elemental analysis in the field, at the scrapyard or on the shop floor.

Spark OES for fast, precise composition analysis of metals and alloys in production control.

Spark OES for fast, precise composition analysis of metals and alloys in production control.

Box furnace for sintering, ceramics and material testing at very high temperatures.

Quick grinding and homogenising of small sample volumes, ideal for routine laboratory preparation.

A general-purpose muffle furnace for ashing, drying and heat treatment in the laboratory.

Reliable grinding and mixing of minerals, ores, soils and powders ahead of analysis.

Grinds, mixes and triturates powders and pastes, reproducing manual mortar work consistently.

Benchtop XRF for fast, non-destructive elemental analysis of metals, minerals and powders.

Benchtop XRF with extended range and sensitivity for demanding elemental analysis.

Measures many elements at trace levels in a single run, for environmental, food and materials testing.

Ultra-trace and isotopic elemental measurement for the most demanding quality and research work.

Handheld XRF for on-the-spot alloy identification, scrap sorting and precious metal testing.

Portable XRF for rapid elemental analysis in the field, at the scrapyard or on the shop floor.

Spark OES for fast, precise composition analysis of metals and alloys in production control.

Spark OES for fast, precise composition analysis of metals and alloys in production control.

Determines carbon, hydrogen and nitrogen content in organic and inorganic samples.

Automatically measures moisture, volatile matter, ash and fixed carbon in coal and biomass.

Measures carbon and sulfur in steel, iron, alloys, ores and other inorganic materials.

Infrared determination of total sulfur in coal, coke, oils and other fuels.

Cuts soft, fibrous and heterogeneous materials such as plant matter, plastics and waste into uniform particles.

Separates and measures particle size distribution with three-dimensional sieving motion.

Air-jet sieving for fine, dry powders that clog or agglomerate on conventional sieves.

Measures the gross calorific value of coal, fuels, biomass and food samples.

Automated calorific value testing with less operator time for busy fuel laboratories.

Fully automated calorific value measurement for high-throughput fuel testing.

Presses powders into uniform pellets for XRF and other analysis, with repeatable pressure.

Presses powders into uniform pellets for XRF and other analysis, with repeatable pressure.

Splits bulk samples into representative sub-samples for consistent, reliable analysis.

Riffle division of granular materials into equal, representative portions.

Coarse and primary crushing of hard, brittle rocks, ores and minerals ahead of fine grinding.

Pulverises hard, brittle samples such as ores, rocks and slag to analytical fineness in minutes.

Reliable grinding and mixing of minerals, ores, soils and powders ahead of analysis.

Studies thermal runaway and reaction hazards for process safety and battery testing.

Measures the heat released by chemical reactions to support safe process scale-up.

Assesses the explosion severity of combustible dusts in a 20-litre sphere.

Finds the minimum spark energy that ignites a dust cloud, for dust explosion safety.

Determines the lowest surface temperature at which a dust cloud ignites.

Laboratory furnaces for heat treatment, ashing and sintering across research and quality control.

Benchtop XRF for fast, non-destructive elemental analysis of metals, minerals and powders.

Benchtop XRF with extended range and sensitivity for demanding elemental analysis.

Spark OES for fast, precise composition analysis of metals and alloys in production control.

Spark OES for fast, precise composition analysis of metals and alloys in production control.

Independently controlled heating zones for uniform or graded temperature profiles along the tube.

Impact grinding of brittle materials like grain, coal and minerals into consistent particle sizes.

Presses powders into uniform pellets for XRF and other analysis, with repeatable pressure.

Presses powders into uniform pellets for XRF and other analysis, with repeatable pressure.

Splits bulk samples into representative sub-samples for consistent, reliable analysis.

Riffle division of granular materials into equal, representative portions.

Coarse and primary crushing of hard, brittle rocks, ores and minerals ahead of fine grinding.

Coarse and primary crushing of hard, brittle rocks, ores and minerals ahead of fine grinding.

Coarse and primary crushing of hard, brittle rocks, ores and minerals ahead of fine grinding.

Coarse and primary crushing of hard, brittle rocks, ores and minerals ahead of fine grinding.

Pulverises hard, brittle samples such as ores, rocks and slag to analytical fineness in minutes.

Heats samples in a tube under air, vacuum or controlled gas for synthesis and annealing.

Heats samples in a tube under air, vacuum or controlled gas for synthesis and annealing.

Burns off organic matter to measure ash content in coal, food, feed and polymers.

Ignition-method furnace for measuring binder content in asphalt mixtures.

Continuous fine grinding of hard and brittle materials between rotating discs.

Reliable grinding and mixing of minerals, ores, soils and powders ahead of analysis.

Grinds tough, elastic and temperature-sensitive samples under liquid-nitrogen cooling, keeping them intact.

Benchtop XRF for fast, non-destructive elemental analysis of metals, minerals and powders.

Benchtop XRF with extended range and sensitivity for demanding elemental analysis.

Measures many elements at trace levels in a single run, for environmental, food and materials testing.

Ultra-trace and isotopic elemental measurement for the most demanding quality and research work.

Handheld XRF for on-the-spot alloy identification, scrap sorting and precious metal testing.

Portable XRF for rapid elemental analysis in the field, at the scrapyard or on the shop floor.

Spark OES for fast, precise composition analysis of metals and alloys in production control.

Spark OES for fast, precise composition analysis of metals and alloys in production control.

Cuts soft, fibrous and heterogeneous materials such as plant matter, plastics and waste into uniform particles.

Cuts soft, fibrous and heterogeneous materials such as plant matter, plastics and waste into uniform particles.

Impact grinding of brittle materials like grain, coal and minerals into consistent particle sizes.

Homogenises food, feed and moist samples with rotating blades for representative analysis.

Homogenises food, feed and moist samples with rotating blades for representative analysis.

Separates and measures particle size distribution with three-dimensional sieving motion.

Air-jet sieving for fine, dry powders that clog or agglomerate on conventional sieves.

Coarse and primary crushing of hard, brittle rocks, ores and minerals ahead of fine grinding.

Pulverises hard, brittle samples such as ores, rocks and slag to analytical fineness in minutes.

A compact cutting mill for preparing fibrous and soft samples on site or on a crowded bench.

Benchtop XRF for fast, non-destructive elemental analysis of metals, minerals and powders.

Benchtop XRF with extended range and sensitivity for demanding elemental analysis.

Measures many elements at trace levels in a single run, for environmental, food and materials testing.

Ultra-trace and isotopic elemental measurement for the most demanding quality and research work.

Determines carbon, hydrogen and nitrogen content in organic and inorganic samples.

Measures carbon and sulfur in steel, iron, alloys, ores and other inorganic materials.

Infrared determination of total sulfur in coal, coke, oils and other fuels.

Cuts soft, fibrous and heterogeneous materials such as plant matter, plastics and waste into uniform particles.

Separates and measures particle size distribution with three-dimensional sieving motion.

Coarse and primary crushing of hard, brittle rocks, ores and minerals ahead of fine grinding.

Grinds and mixes powders down to the nanometre range, for advanced materials research and sample preparation.

High-impact milling for fast size reduction, mechanical alloying and the synthesis of new materials.

Fine grinding, mixing and homogenising of hard, brittle and fibrous samples, wet or dry.

Fine grinding, mixing and homogenising of hard, brittle and fibrous samples, wet or dry.

Fine grinding, mixing and homogenising of hard, brittle and fibrous samples, wet or dry.

Fine grinding, mixing and homogenising of hard, brittle and fibrous samples, wet or dry.

Fine grinding, mixing and homogenising of hard, brittle and fibrous samples, wet or dry.

Grinds tough, elastic and temperature-sensitive samples under liquid-nitrogen cooling, keeping them intact.

Quick grinding and homogenising of small sample volumes, ideal for routine laboratory preparation.

Cuts soft, fibrous and heterogeneous materials such as plant matter, plastics and waste into uniform particles.

Cuts soft, fibrous and heterogeneous materials such as plant matter, plastics and waste into uniform particles.

Cuts soft, fibrous and heterogeneous materials such as plant matter, plastics and waste into uniform particles.

Cuts soft, fibrous and heterogeneous materials such as plant matter, plastics and waste into uniform particles.

Cuts soft, fibrous and heterogeneous materials such as plant matter, plastics and waste into uniform particles.

Impact grinding of brittle materials like grain, coal and minerals into consistent particle sizes.

Homogenises food, feed and moist samples with rotating blades for representative analysis.

Homogenises food, feed and moist samples with rotating blades for representative analysis.

Homogenises food, feed and moist samples with rotating blades for representative analysis.

Rapid, gentle fine grinding of soft to medium-hard materials with minimal heat build-up.

Separates and measures particle size distribution with three-dimensional sieving motion.

Air-jet sieving for fine, dry powders that clog or agglomerate on conventional sieves.

Presses powders into uniform pellets for XRF and other analysis, with repeatable pressure.

Presses powders into uniform pellets for XRF and other analysis, with repeatable pressure.

Splits bulk samples into representative sub-samples for consistent, reliable analysis.

Riffle division of granular materials into equal, representative portions.

Coarse and primary crushing of hard, brittle rocks, ores and minerals ahead of fine grinding.

Coarse and primary crushing of hard, brittle rocks, ores and minerals ahead of fine grinding.

Coarse and primary crushing of hard, brittle rocks, ores and minerals ahead of fine grinding.

Coarse and primary crushing of hard, brittle rocks, ores and minerals ahead of fine grinding.

Coarse and primary crushing of hard, brittle rocks, ores and minerals ahead of fine grinding.

Pulverises hard, brittle samples such as ores, rocks and slag to analytical fineness in minutes.

Pulverises hard, brittle samples such as ores, rocks and slag to analytical fineness in minutes.

Pulverises hard, brittle samples such as ores, rocks and slag to analytical fineness in minutes.

Pulverises hard, brittle samples such as ores, rocks and slag to analytical fineness in minutes.

Continuous fine grinding of hard and brittle materials between rotating discs.

Reliable grinding and mixing of minerals, ores, soils and powders ahead of analysis.

Grinds, mixes and triturates powders and pastes, reproducing manual mortar work consistently.

Fast grinding of grain, feed and food with cyclone separation, suited to NIR and nutrient analysis.

A compact cutting mill for preparing fibrous and soft samples on site or on a crowded bench.

Ultra-high-temperature processing in an inert or vacuum atmosphere using graphite heating elements.

Heat treatment, sintering and brazing under vacuum to prevent oxidation and contamination.

Heat treatment under inert or reducing gases for oxidation-free sintering and annealing.

A configurable tube furnace for annealing, synthesis and controlled-atmosphere work.

A hinged tube furnace that opens for fast loading and cooling of tubes and reactors.

Box furnace for sintering, ceramics and material testing at very high temperatures.

Hardening, tempering and annealing of metal parts with precise temperature control.

Hardening, tempering and annealing of metal parts with precise temperature control.

Independently controlled heating zones for uniform or graded temperature profiles along the tube.

A general-purpose muffle furnace for ashing, drying and heat treatment in the laboratory.

A general-purpose muffle furnace for ashing, drying and heat treatment in the laboratory.

Opens along its length to place and remove tubes quickly, ideal for reactor setups.

Heats samples in a tube under air, vacuum or controlled gas for synthesis and annealing.

Heats samples in a tube under air, vacuum or controlled gas for synthesis and annealing.

Heats samples in a tube under air, vacuum or controlled gas for synthesis and annealing.

An economical chamber furnace for everyday ashing, drying and heat treatment.

High-temperature chamber furnace with molybdenum disilicide elements for ceramics and sintering.

Laboratory furnaces for heat treatment, ashing and sintering across research and quality control.

Benchtop XRF for fast, non-destructive elemental analysis of metals, minerals and powders.

Benchtop XRF with extended range and sensitivity for demanding elemental analysis.

Measures many elements at trace levels in a single run, for environmental, food and materials testing.

Ultra-trace and isotopic elemental measurement for the most demanding quality and research work.

Handheld XRF for on-the-spot alloy identification, scrap sorting and precious metal testing.

Portable XRF for rapid elemental analysis in the field, at the scrapyard or on the shop floor.

Determines carbon, hydrogen and nitrogen content in organic and inorganic samples.

Measures carbon and sulfur in steel, iron, alloys, ores and other inorganic materials.

Infrared determination of total sulfur in coal, coke, oils and other fuels.

Spark OES for fast, precise composition analysis of metals and alloys in production control.

Spark OES for fast, precise composition analysis of metals and alloys in production control.

Automatically measures moisture, volatile matter, ash and fixed carbon in coal and biomass.

Measures the gross calorific value of coal, fuels, biomass and food samples.

Automated calorific value testing with less operator time for busy fuel laboratories.

Fully automated calorific value measurement for high-throughput fuel testing.

Portable testing of coal quality parameters at mines, ports and power plants.

Determines the ash fusion temperatures of coal, coke and biomass to predict slagging behaviour.

Burns off organic matter to measure ash content in coal, food, feed and polymers.

Ignition-method furnace for measuring binder content in asphalt mixtures.

Determines the closed-cup flash point of fuels and solvents using small sample volumes.

Measures the vapour pressure of fuels and volatile liquids for quality and safety compliance.

Fuses samples with flux into glass beads for highly accurate XRF analysis.

Studies thermal runaway and reaction hazards for process safety and battery testing.

Measures the heat released by chemical reactions to support safe process scale-up.

Assesses the explosion severity of combustible dusts in a 20-litre sphere.

Finds the minimum spark energy that ignites a dust cloud, for dust explosion safety.

Determines the lowest surface temperature at which a dust cloud ignites.