Contact us
Tell us about your samples and what you need to achieve. Our team can help you choose equipment, arrange a sample test or organise service.
Reach us directly
- Sales
- YOUR_REAL_SALES_EMAIL
Grinding & Milling
-
Planetary Nano Ball Mill - BM2200+Grinds and mixes powders down to the nanometre range, for advanced materials research and sample preparation.
-
High Energy Ball Mill - MM1600High-impact milling for fast size reduction, mechanical alloying and the synthesis of new materials.
-
Planetary Ball Mill - BM 1500+ SeriesFine grinding, mixing and homogenising of hard, brittle and fibrous samples, wet or dry.
-
Planetary Ball Mill - BM1150+Fine grinding, mixing and homogenising of hard, brittle and fibrous samples, wet or dry.
-
Planetary Ball Mill - BM 1100+Fine grinding, mixing and homogenising of hard, brittle and fibrous samples, wet or dry.
-
Planetary Ball Mill - BM 1200+Fine grinding, mixing and homogenising of hard, brittle and fibrous samples, wet or dry.
-
Planetary Ball Mill - BM 1400+Fine grinding, mixing and homogenising of hard, brittle and fibrous samples, wet or dry.
-
Cryogenic Ball Mill - CM1100Grinds tough, elastic and temperature-sensitive samples under liquid-nitrogen cooling, keeping them intact.
-
Micro Ball Mill - MM1100Quick grinding and homogenising of small sample volumes, ideal for routine laboratory preparation.
-
Ball Mill - BM SeriesReliable grinding and mixing of minerals, ores, soils and powders ahead of analysis.
-
Cutting Mill - C10Cuts soft, fibrous and heterogeneous materials such as plant matter, plastics and waste into uniform particles.
-
Cutting Mill - C25
Cuts soft, fibrous and heterogeneous materials such as plant matter, plastics and waste into uniform particles.
-
Cutting Mill - C90
Cuts soft, fibrous and heterogeneous materials such as plant matter, plastics and waste into uniform particles.
-
Cutting Mill - C Series
Cuts soft, fibrous and heterogeneous materials such as plant matter, plastics and waste into uniform particles.
-
Cutting Mill - C10/C25/C90
Cuts soft, fibrous and heterogeneous materials such as plant matter, plastics and waste into uniform particles.
-
Portable Cutting Mill - C10
A compact cutting mill for preparing fibrous and soft samples on site or on a crowded bench.
-
Hammer Mill - HM 1100Impact grinding of brittle materials like grain, coal and minerals into consistent particle sizes.
-
Knife Mill - KM1100Homogenises food, feed and moist samples with rotating blades for representative analysis.
-
Knife Mill - KM1300Homogenises food, feed and moist samples with rotating blades for representative analysis.
-
Knife Mill - KM1100/KM1300
Homogenises food, feed and moist samples with rotating blades for representative analysis.
-
Ultra Centrifugal Mill - UCM1100
Rapid, gentle fine grinding of soft to medium-hard materials with minimal heat build-up.
-
Vibratory Disc Mill - VDM 1000 SeriesPulverises hard, brittle samples such as ores, rocks and slag to analytical fineness in minutes.
-
Vibratory Disc Mill - VDM 1100Pulverises hard, brittle samples such as ores, rocks and slag to analytical fineness in minutes.
-
Vibratory Disc Mill - VDM 1200Pulverises hard, brittle samples such as ores, rocks and slag to analytical fineness in minutes.
-
Vibratory Disc Mill - VDM SeriesPulverises hard, brittle samples such as ores, rocks and slag to analytical fineness in minutes.
-
Disc Mill / Pulverizer - DM 1100Continuous fine grinding of hard and brittle materials between rotating discs.
-
Mortar Grinder - HG 1100Grinds, mixes and triturates powders and pastes, reproducing manual mortar work consistently.
-
Cyclone Mill Twister - TW1100Fast grinding of grain, feed and food with cyclone separation, suited to NIR and nutrient analysis.
Furnaces & Thermal Processing
- Graphite Furnace 1
- Vacuum Furnace 1
- Atmosphere Controlled Furnace 1
- Modular Tube Furnace 1
- Modular Split Tube Furnace 1
- High Temperature Chamber Furnace 1
- Heat Treatment Furnace 2
- Multi-Zone Tube Furnace 1
- Chamber Furnace 2
- Split Tube Furnace 1
- Tube Furnace 3
- Ash Fusion Furnace 1
- Ashing Furnace 1
- Asphalt Chamber Furnace 1
- Chamber Furnace Eco 1
- MoS Series Chamber Furnace 1
- Furnaces 1
-
Graphite Furnace - GRFUltra-high-temperature processing in an inert or vacuum atmosphere using graphite heating elements.
-
Vacuum Furnace - PVAC
Heat treatment, sintering and brazing under vacuum to prevent oxidation and contamination.
-
Atmosphere Controlled Furnace - ACF SeriesHeat treatment under inert or reducing gases for oxidation-free sintering and annealing.
-
Modular Tube Furnace - MTF
A configurable tube furnace for annealing, synthesis and controlled-atmosphere work.
-
Modular Split Tube Furnace - ASP
A hinged tube furnace that opens for fast loading and cooling of tubes and reactors.
-
High Temperature Chamber Furnace - MoS Series
Box furnace for sintering, ceramics and material testing at very high temperatures.
-
Heat Treatment Furnace - HDF SeriesHardening, tempering and annealing of metal parts with precise temperature control.
-
Heat Treatment Furnace - HLF Series
Hardening, tempering and annealing of metal parts with precise temperature control.
-
Multi-Zone Tube Furnace - PZF SeriesIndependently controlled heating zones for uniform or graded temperature profiles along the tube.
-
Chamber Furnace - PLF SeriesA general-purpose muffle furnace for ashing, drying and heat treatment in the laboratory.
-
Chamber Furnace - MoS SeriesA general-purpose muffle furnace for ashing, drying and heat treatment in the laboratory.
-
Split Tube Furnace - ASP-W
Opens along its length to place and remove tubes quickly, ideal for reactor setups.
-
Tube Furnace - PTF SeriesHeats samples in a tube under air, vacuum or controlled gas for synthesis and annealing.
-
Tube Furnace - STF SeriesHeats samples in a tube under air, vacuum or controlled gas for synthesis and annealing.
-
Tube Furnace - PTF/PZF/STF Series
Heats samples in a tube under air, vacuum or controlled gas for synthesis and annealing.
-
Ash Fusion Furnace - LAF16
Determines the ash fusion temperatures of coal, coke and biomass to predict slagging behaviour.
-
Ashing Furnace - PAF SeriesBurns off organic matter to measure ash content in coal, food, feed and polymers.
-
Asphalt Chamber Furnace - PASF
Ignition-method furnace for measuring binder content in asphalt mixtures.
-
Chamber Furnace Eco - Eco Series
An economical chamber furnace for everyday ashing, drying and heat treatment.
-
MoS Series Chamber FurnaceHigh-temperature chamber furnace with molybdenum disilicide elements for ceramics and sintering.
-
Furnaces - Multiple series
Laboratory furnaces for heat treatment, ashing and sintering across research and quality control.
Elemental Analysis
-
ElvaX Plus XRF Benchtop SpectrometerBenchtop XRF for fast, non-destructive elemental analysis of metals, minerals and powders.
-
ElvaX Pro XRF Benchtop SpectrometerBenchtop XRF with extended range and sensitivity for demanding elemental analysis.
-
Prospector 2 XRF Handheld SpectrometerHandheld XRF for on-the-spot alloy identification, scrap sorting and precious metal testing.
-
Prospector 3 Handheld XRF SpectrometerPortable XRF for rapid elemental analysis in the field, at the scrapyard or on the shop floor.
-
ICP-OES - ICP 5000 DVMeasures many elements at trace levels in a single run, for environmental, food and materials testing.
-
ICP-MS - ICP-MS 5500Ultra-trace and isotopic elemental measurement for the most demanding quality and research work.
-
Optical Emission Spectrometer (OES) - LABSPECTROSpark OES for fast, precise composition analysis of metals and alloys in production control.
-
Optical Emission Spectrometer (OES) - LABSPECTRO PROSpark OES for fast, precise composition analysis of metals and alloys in production control.
-
CHN Elemental Analyser - LCHN3600Determines carbon, hydrogen and nitrogen content in organic and inorganic samples.
-
Infrared Carbon Sulfur Analyser - LCS 3500Measures carbon and sulfur in steel, iron, alloys, ores and other inorganic materials.
-
IR Sulfur Analyser - LS3000/IR
Infrared determination of total sulfur in coal, coke, oils and other fuels.
Analyzers
-
Automatic Proximate Analyzer (TGA) - LPA4000Automatically measures moisture, volatile matter, ash and fixed carbon in coal and biomass.
-
Bomb Calorimeter - BCI-2000Measures the gross calorific value of coal, fuels, biomass and food samples.
-
Automatic Bomb Calorimeter - BCI 2000/T
Automated calorific value testing with less operator time for busy fuel laboratories.
-
Fully Automatic Bomb Calorimeter - BCI 3000Fully automated calorific value measurement for high-throughput fuel testing.
-
Accelerating Rate Calorimeter - TAC-500AE
Studies thermal runaway and reaction hazards for process safety and battery testing.
-
Reaction Calorimeter - RC HP-1000AE
Measures the heat released by chemical reactions to support safe process scale-up.
-
Portable Coal Quality Test Analyser - FC-KH-01
Portable testing of coal quality parameters at mines, ports and power plants.
-
Micro Continuous Closed-Cup Flash Point Tester - FP CC-420AE
Determines the closed-cup flash point of fuels and solvents using small sample volumes.
-
Micro Vapor Pressure Tester - VP TE-1000AE
Measures the vapour pressure of fuels and volatile liquids for quality and safety compliance.
-
20L Spherical Explosion Tester - ECD-20AE
Assesses the explosion severity of combustible dusts in a 20-litre sphere.
-
Dust Cloud Minimum Ignition Energy Tester - MIE-3000AE
Finds the minimum spark energy that ignites a dust cloud, for dust explosion safety.
-
Minimum Ignition Temperature Tester for Dust Clouds - MITC-1000AE
Determines the lowest surface temperature at which a dust cloud ignites.
Sieving
-
Vibratory Sieve Shaker - VS1100Separates and measures particle size distribution with three-dimensional sieving motion.
-
Air Jet Sieve Shaker - JS1100Air-jet sieving for fine, dry powders that clog or agglomerate on conventional sieves.
Sample Preparation & Handling
-
Automatic Pellet Press - LP40TPresses powders into uniform pellets for XRF and other analysis, with repeatable pressure.
-
Automatic Pellet Press - PP40
Presses powders into uniform pellets for XRF and other analysis, with repeatable pressure.
-
Rotary Sample Divider - RSD SeriesSplits bulk samples into representative sub-samples for consistent, reliable analysis.
-
Sample Splitter - SS
Riffle division of granular materials into equal, representative portions.
-
Glass Fusion Furnace - PGLS Series
Fuses samples with flux into glass beads for highly accurate XRF analysis.
Crushing
-
Jaw Crusher - JC1000Coarse and primary crushing of hard, brittle rocks, ores and minerals ahead of fine grinding.
-
Jaw Crusher - JC1100
Coarse and primary crushing of hard, brittle rocks, ores and minerals ahead of fine grinding.
-
Jaw Crusher - JC1200
Coarse and primary crushing of hard, brittle rocks, ores and minerals ahead of fine grinding.
-
Jaw Crusher - JC1300
Coarse and primary crushing of hard, brittle rocks, ores and minerals ahead of fine grinding.
-
Jaw Crusher - JC1000–JC1300
Coarse and primary crushing of hard, brittle rocks, ores and minerals ahead of fine grinding.
Industries
-
Advanced Materials
17
-
Aerospace
14
-
Agriculture & Fertilizers
18
-
Assay & Testing Laboratories
23
-
Automotive & Engineering
20
-
Battery & Energy Materials
21
-
Biomass & Renewable Energy
18
-
Bitumen & Asphalt
14
-
Cement & Construction Materials
23
-
Ceramics & Glass
17
-
Chemical & Specialty Chemicals
20
-
Coal & Power
20
-
Electronics & Semiconductors
18
-
Environmental Testing
19
-
Food & Beverage
15
-
Food & Feed
15
-
Foundries & Casting
17
-
Fuels & Lubricants
14
-
Geology & Exploration
22
-
Metals & Steel
18
-
Mining & Minerals
23
-
Non-Ferrous Metals
16
-
Oil & Gas / Petrochemicals
15
-
Petroleum & Petrochemicals
15
-
Pharmaceuticals
18
-
Plastics & Polymers
22
-
Powders & Advanced Materials
22
-
Precious Metals & Jewelry
15
-
Research & Testing Laboratories
31
-
Roads & Infrastructure
21
-
Scrap & Recycling
19
-
Water & Wastewater
10
-
Planetary Nano Ball Mill - BM2200+
Grinds and mixes powders down to the nanometre range, for advanced materials research and sample preparation.
-
High Energy Ball Mill - MM1600
High-impact milling for fast size reduction, mechanical alloying and the synthesis of new materials.
-
Planetary Ball Mill - BM 1500+ Series
Fine grinding, mixing and homogenising of hard, brittle and fibrous samples, wet or dry.
-
Planetary Ball Mill - BM1150+
Fine grinding, mixing and homogenising of hard, brittle and fibrous samples, wet or dry.
-
Planetary Ball Mill - BM 1100+
Fine grinding, mixing and homogenising of hard, brittle and fibrous samples, wet or dry.
-
Planetary Ball Mill - BM 1200+
Fine grinding, mixing and homogenising of hard, brittle and fibrous samples, wet or dry.
-
Planetary Ball Mill - BM 1400+
Fine grinding, mixing and homogenising of hard, brittle and fibrous samples, wet or dry.
-
Cryogenic Ball Mill - CM1100
Grinds tough, elastic and temperature-sensitive samples under liquid-nitrogen cooling, keeping them intact.
-
Graphite Furnace - GRF
Ultra-high-temperature processing in an inert or vacuum atmosphere using graphite heating elements.
-
Vacuum Furnace - PVAC
Heat treatment, sintering and brazing under vacuum to prevent oxidation and contamination.
-
Atmosphere Controlled Furnace - ACF Series
Heat treatment under inert or reducing gases for oxidation-free sintering and annealing.
-
Modular Tube Furnace - MTF
A configurable tube furnace for annealing, synthesis and controlled-atmosphere work.
-
Modular Split Tube Furnace - ASP
A hinged tube furnace that opens for fast loading and cooling of tubes and reactors.
-
ElvaX Plus XRF Benchtop Spectrometer
Benchtop XRF for fast, non-destructive elemental analysis of metals, minerals and powders.
-
ElvaX Pro XRF Benchtop Spectrometer
Benchtop XRF with extended range and sensitivity for demanding elemental analysis.
-
ICP-OES - ICP 5000 DV
Measures many elements at trace levels in a single run, for environmental, food and materials testing.
-
ICP-MS - ICP-MS 5500
Ultra-trace and isotopic elemental measurement for the most demanding quality and research work.
-
Vacuum Furnace - PVAC
Heat treatment, sintering and brazing under vacuum to prevent oxidation and contamination.
-
Atmosphere Controlled Furnace - ACF Series
Heat treatment under inert or reducing gases for oxidation-free sintering and annealing.
-
ElvaX Plus XRF Benchtop Spectrometer
Benchtop XRF for fast, non-destructive elemental analysis of metals, minerals and powders.
-
ElvaX Pro XRF Benchtop Spectrometer
Benchtop XRF with extended range and sensitivity for demanding elemental analysis.
-
ICP-OES - ICP 5000 DV
Measures many elements at trace levels in a single run, for environmental, food and materials testing.
-
ICP-MS - ICP-MS 5500
Ultra-trace and isotopic elemental measurement for the most demanding quality and research work.
-
Prospector 2 XRF Handheld Spectrometer
Handheld XRF for on-the-spot alloy identification, scrap sorting and precious metal testing.
-
Prospector 3 Handheld XRF Spectrometer
Portable XRF for rapid elemental analysis in the field, at the scrapyard or on the shop floor.
-
Optical Emission Spectrometer (OES) - LABSPECTRO
Spark OES for fast, precise composition analysis of metals and alloys in production control.
-
Optical Emission Spectrometer (OES) - LABSPECTRO PRO
Spark OES for fast, precise composition analysis of metals and alloys in production control.
-
High Temperature Chamber Furnace - MoS Series
Box furnace for sintering, ceramics and material testing at very high temperatures.
-
Heat Treatment Furnace - HDF Series
Hardening, tempering and annealing of metal parts with precise temperature control.
-
Heat Treatment Furnace - HLF Series
Hardening, tempering and annealing of metal parts with precise temperature control.
-
Multi-Zone Tube Furnace - PZF Series
Independently controlled heating zones for uniform or graded temperature profiles along the tube.
-
High Energy Ball Mill - MM1600
High-impact milling for fast size reduction, mechanical alloying and the synthesis of new materials.
-
Cryogenic Ball Mill - CM1100
Grinds tough, elastic and temperature-sensitive samples under liquid-nitrogen cooling, keeping them intact.
-
ICP-OES - ICP 5000 DV
Measures many elements at trace levels in a single run, for environmental, food and materials testing.
-
ICP-MS - ICP-MS 5500
Ultra-trace and isotopic elemental measurement for the most demanding quality and research work.
-
CHN Elemental Analyser - LCHN3600
Determines carbon, hydrogen and nitrogen content in organic and inorganic samples.
-
Automatic Proximate Analyzer (TGA) - LPA4000
Automatically measures moisture, volatile matter, ash and fixed carbon in coal and biomass.
-
Infrared Carbon Sulfur Analyser - LCS 3500
Measures carbon and sulfur in steel, iron, alloys, ores and other inorganic materials.
-
IR Sulfur Analyser - LS3000/IR
Infrared determination of total sulfur in coal, coke, oils and other fuels.
-
Micro Ball Mill - MM1100
Quick grinding and homogenising of small sample volumes, ideal for routine laboratory preparation.
-
Cutting Mill - C10
Cuts soft, fibrous and heterogeneous materials such as plant matter, plastics and waste into uniform particles.
-
Cutting Mill - C25
Cuts soft, fibrous and heterogeneous materials such as plant matter, plastics and waste into uniform particles.
-
Cutting Mill - C90
Cuts soft, fibrous and heterogeneous materials such as plant matter, plastics and waste into uniform particles.
-
Hammer Mill - HM 1100
Impact grinding of brittle materials like grain, coal and minerals into consistent particle sizes.
-
Knife Mill - KM1100
Homogenises food, feed and moist samples with rotating blades for representative analysis.
-
Knife Mill - KM1300
Homogenises food, feed and moist samples with rotating blades for representative analysis.
-
Ultra Centrifugal Mill - UCM1100
Rapid, gentle fine grinding of soft to medium-hard materials with minimal heat build-up.
-
Vibratory Sieve Shaker - VS1100
Separates and measures particle size distribution with three-dimensional sieving motion.
-
Air Jet Sieve Shaker - JS1100
Air-jet sieving for fine, dry powders that clog or agglomerate on conventional sieves.
-
ElvaX Plus XRF Benchtop Spectrometer
Benchtop XRF for fast, non-destructive elemental analysis of metals, minerals and powders.
-
ElvaX Pro XRF Benchtop Spectrometer
Benchtop XRF with extended range and sensitivity for demanding elemental analysis.
-
ICP-OES - ICP 5000 DV
Measures many elements at trace levels in a single run, for environmental, food and materials testing.
-
ICP-MS - ICP-MS 5500
Ultra-trace and isotopic elemental measurement for the most demanding quality and research work.
-
Prospector 2 XRF Handheld Spectrometer
Handheld XRF for on-the-spot alloy identification, scrap sorting and precious metal testing.
-
Prospector 3 Handheld XRF Spectrometer
Portable XRF for rapid elemental analysis in the field, at the scrapyard or on the shop floor.
-
Optical Emission Spectrometer (OES) - LABSPECTRO
Spark OES for fast, precise composition analysis of metals and alloys in production control.
-
Optical Emission Spectrometer (OES) - LABSPECTRO PRO
Spark OES for fast, precise composition analysis of metals and alloys in production control.
-
CHN Elemental Analyser - LCHN3600
Determines carbon, hydrogen and nitrogen content in organic and inorganic samples.
-
Automatic Proximate Analyzer (TGA) - LPA4000
Automatically measures moisture, volatile matter, ash and fixed carbon in coal and biomass.
-
Infrared Carbon Sulfur Analyser - LCS 3500
Measures carbon and sulfur in steel, iron, alloys, ores and other inorganic materials.
-
IR Sulfur Analyser - LS3000/IR
Infrared determination of total sulfur in coal, coke, oils and other fuels.
-
Bomb Calorimeter - BCI-2000
Measures the gross calorific value of coal, fuels, biomass and food samples.
-
Automatic Bomb Calorimeter - BCI 2000/T
Automated calorific value testing with less operator time for busy fuel laboratories.
-
Fully Automatic Bomb Calorimeter - BCI 3000
Fully automated calorific value measurement for high-throughput fuel testing.
-
Automatic Pellet Press - LP40T
Presses powders into uniform pellets for XRF and other analysis, with repeatable pressure.
-
Automatic Pellet Press - PP40
Presses powders into uniform pellets for XRF and other analysis, with repeatable pressure.
-
Rotary Sample Divider - RSD Series
Splits bulk samples into representative sub-samples for consistent, reliable analysis.
-
Sample Splitter - SS
Riffle division of granular materials into equal, representative portions.
-
Jaw Crusher - JC1000
Coarse and primary crushing of hard, brittle rocks, ores and minerals ahead of fine grinding.
-
Jaw Crusher - JC1100
Coarse and primary crushing of hard, brittle rocks, ores and minerals ahead of fine grinding.
-
Jaw Crusher - JC1200
Coarse and primary crushing of hard, brittle rocks, ores and minerals ahead of fine grinding.
-
Jaw Crusher - JC1300
Coarse and primary crushing of hard, brittle rocks, ores and minerals ahead of fine grinding.
-
High Energy Ball Mill - MM1600
High-impact milling for fast size reduction, mechanical alloying and the synthesis of new materials.
-
Cryogenic Ball Mill - CM1100
Grinds tough, elastic and temperature-sensitive samples under liquid-nitrogen cooling, keeping them intact.
-
Vacuum Furnace - PVAC
Heat treatment, sintering and brazing under vacuum to prevent oxidation and contamination.
-
ElvaX Plus XRF Benchtop Spectrometer
Benchtop XRF for fast, non-destructive elemental analysis of metals, minerals and powders.
-
ElvaX Pro XRF Benchtop Spectrometer
Benchtop XRF with extended range and sensitivity for demanding elemental analysis.
-
ICP-OES - ICP 5000 DV
Measures many elements at trace levels in a single run, for environmental, food and materials testing.
-
ICP-MS - ICP-MS 5500
Ultra-trace and isotopic elemental measurement for the most demanding quality and research work.
-
Prospector 2 XRF Handheld Spectrometer
Handheld XRF for on-the-spot alloy identification, scrap sorting and precious metal testing.
-
Prospector 3 Handheld XRF Spectrometer
Portable XRF for rapid elemental analysis in the field, at the scrapyard or on the shop floor.
-
Optical Emission Spectrometer (OES) - LABSPECTRO
Spark OES for fast, precise composition analysis of metals and alloys in production control.
-
Optical Emission Spectrometer (OES) - LABSPECTRO PRO
Spark OES for fast, precise composition analysis of metals and alloys in production control.
-
Heat Treatment Furnace - HDF Series
Hardening, tempering and annealing of metal parts with precise temperature control.
-
Heat Treatment Furnace - HLF Series
Hardening, tempering and annealing of metal parts with precise temperature control.
-
Micro Ball Mill - MM1100
Quick grinding and homogenising of small sample volumes, ideal for routine laboratory preparation.
-
Jaw Crusher - JC1000–JC1300
Coarse and primary crushing of hard, brittle rocks, ores and minerals ahead of fine grinding.
-
Chamber Furnace - PLF Series
A general-purpose muffle furnace for ashing, drying and heat treatment in the laboratory.
-
Chamber Furnace - MoS Series
A general-purpose muffle furnace for ashing, drying and heat treatment in the laboratory.
-
Vibratory Disc Mill - VDM 1000 Series
Pulverises hard, brittle samples such as ores, rocks and slag to analytical fineness in minutes.
-
Vibratory Disc Mill - VDM 1100
Pulverises hard, brittle samples such as ores, rocks and slag to analytical fineness in minutes.
-
Vibratory Disc Mill - VDM 1200
Pulverises hard, brittle samples such as ores, rocks and slag to analytical fineness in minutes.
-
Planetary Nano Ball Mill - BM2200+
Grinds and mixes powders down to the nanometre range, for advanced materials research and sample preparation.
-
High Energy Ball Mill - MM1600
High-impact milling for fast size reduction, mechanical alloying and the synthesis of new materials.
-
Planetary Ball Mill - BM 1500+ Series
Fine grinding, mixing and homogenising of hard, brittle and fibrous samples, wet or dry.
-
Planetary Ball Mill - BM1150+
Fine grinding, mixing and homogenising of hard, brittle and fibrous samples, wet or dry.
-
Planetary Ball Mill - BM 1100+
Fine grinding, mixing and homogenising of hard, brittle and fibrous samples, wet or dry.
-
Planetary Ball Mill - BM 1200+
Fine grinding, mixing and homogenising of hard, brittle and fibrous samples, wet or dry.
-
Planetary Ball Mill - BM 1400+
Fine grinding, mixing and homogenising of hard, brittle and fibrous samples, wet or dry.
-
Cryogenic Ball Mill - CM1100
Grinds tough, elastic and temperature-sensitive samples under liquid-nitrogen cooling, keeping them intact.
-
Vacuum Furnace - PVAC
Heat treatment, sintering and brazing under vacuum to prevent oxidation and contamination.
-
Atmosphere Controlled Furnace - ACF Series
Heat treatment under inert or reducing gases for oxidation-free sintering and annealing.
-
Modular Tube Furnace - MTF
A configurable tube furnace for annealing, synthesis and controlled-atmosphere work.
-
Modular Split Tube Furnace - ASP
A hinged tube furnace that opens for fast loading and cooling of tubes and reactors.
-
ElvaX Plus XRF Benchtop Spectrometer
Benchtop XRF for fast, non-destructive elemental analysis of metals, minerals and powders.
-
ElvaX Pro XRF Benchtop Spectrometer
Benchtop XRF with extended range and sensitivity for demanding elemental analysis.
-
ICP-OES - ICP 5000 DV
Measures many elements at trace levels in a single run, for environmental, food and materials testing.
-
ICP-MS - ICP-MS 5500
Ultra-trace and isotopic elemental measurement for the most demanding quality and research work.
-
Optical Emission Spectrometer (OES) - LABSPECTRO PRO
Spark OES for fast, precise composition analysis of metals and alloys in production control.
-
Multi-Zone Tube Furnace - PZF Series
Independently controlled heating zones for uniform or graded temperature profiles along the tube.
-
Split Tube Furnace - ASP-W
Opens along its length to place and remove tubes quickly, ideal for reactor setups.
-
Tube Furnace - PTF Series
Heats samples in a tube under air, vacuum or controlled gas for synthesis and annealing.
-
Tube Furnace - STF Series
Heats samples in a tube under air, vacuum or controlled gas for synthesis and annealing.
-
CHN Elemental Analyser - LCHN3600
Determines carbon, hydrogen and nitrogen content in organic and inorganic samples.
-
Automatic Proximate Analyzer (TGA) - LPA4000
Automatically measures moisture, volatile matter, ash and fixed carbon in coal and biomass.
-
Infrared Carbon Sulfur Analyser - LCS 3500
Measures carbon and sulfur in steel, iron, alloys, ores and other inorganic materials.
-
IR Sulfur Analyser - LS3000/IR
Infrared determination of total sulfur in coal, coke, oils and other fuels.
-
Cutting Mill - C10
Cuts soft, fibrous and heterogeneous materials such as plant matter, plastics and waste into uniform particles.
-
Cutting Mill - C25
Cuts soft, fibrous and heterogeneous materials such as plant matter, plastics and waste into uniform particles.
-
Cutting Mill - C90
Cuts soft, fibrous and heterogeneous materials such as plant matter, plastics and waste into uniform particles.
-
Hammer Mill - HM 1100
Impact grinding of brittle materials like grain, coal and minerals into consistent particle sizes.
-
Knife Mill - KM1100
Homogenises food, feed and moist samples with rotating blades for representative analysis.
-
Knife Mill - KM1300
Homogenises food, feed and moist samples with rotating blades for representative analysis.
-
Vibratory Sieve Shaker - VS1100
Separates and measures particle size distribution with three-dimensional sieving motion.
-
Bomb Calorimeter - BCI-2000
Measures the gross calorific value of coal, fuels, biomass and food samples.
-
Automatic Bomb Calorimeter - BCI 2000/T
Automated calorific value testing with less operator time for busy fuel laboratories.
-
Fully Automatic Bomb Calorimeter - BCI 3000
Fully automated calorific value measurement for high-throughput fuel testing.
-
Jaw Crusher - JC1000–JC1300
Coarse and primary crushing of hard, brittle rocks, ores and minerals ahead of fine grinding.
-
Portable Coal Quality Test Analyser - FC-KH-01
Portable testing of coal quality parameters at mines, ports and power plants.
-
Ash Fusion Furnace - LAF16
Determines the ash fusion temperatures of coal, coke and biomass to predict slagging behaviour.
-
Ashing Furnace - PAF Series
Burns off organic matter to measure ash content in coal, food, feed and polymers.
-
ElvaX Plus XRF Benchtop Spectrometer
Benchtop XRF for fast, non-destructive elemental analysis of metals, minerals and powders.
-
ElvaX Pro XRF Benchtop Spectrometer
Benchtop XRF with extended range and sensitivity for demanding elemental analysis.
-
Cutting Mill - C10
Cuts soft, fibrous and heterogeneous materials such as plant matter, plastics and waste into uniform particles.
-
Cutting Mill - C25
Cuts soft, fibrous and heterogeneous materials such as plant matter, plastics and waste into uniform particles.
-
Cutting Mill - C90
Cuts soft, fibrous and heterogeneous materials such as plant matter, plastics and waste into uniform particles.
-
Vibratory Sieve Shaker - VS1100
Separates and measures particle size distribution with three-dimensional sieving motion.
-
Bomb Calorimeter - BCI-2000
Measures the gross calorific value of coal, fuels, biomass and food samples.
-
Automatic Bomb Calorimeter - BCI 2000/T
Automated calorific value testing with less operator time for busy fuel laboratories.
-
Fully Automatic Bomb Calorimeter - BCI 3000
Fully automated calorific value measurement for high-throughput fuel testing.
-
Jaw Crusher - JC1000–JC1300
Coarse and primary crushing of hard, brittle rocks, ores and minerals ahead of fine grinding.
-
Vibratory Disc Mill - VDM Series
Pulverises hard, brittle samples such as ores, rocks and slag to analytical fineness in minutes.
-
Asphalt Chamber Furnace - PASF
Ignition-method furnace for measuring binder content in asphalt mixtures.
-
Micro Continuous Closed-Cup Flash Point Tester - FP CC-420AE
Determines the closed-cup flash point of fuels and solvents using small sample volumes.
-
Micro Vapor Pressure Tester - VP TE-1000AE
Measures the vapour pressure of fuels and volatile liquids for quality and safety compliance.
-
ElvaX Plus XRF Benchtop Spectrometer
Benchtop XRF for fast, non-destructive elemental analysis of metals, minerals and powders.
-
ElvaX Pro XRF Benchtop Spectrometer
Benchtop XRF with extended range and sensitivity for demanding elemental analysis.
-
Optical Emission Spectrometer (OES) - LABSPECTRO
Spark OES for fast, precise composition analysis of metals and alloys in production control.
-
Optical Emission Spectrometer (OES) - LABSPECTRO PRO
Spark OES for fast, precise composition analysis of metals and alloys in production control.
-
Multi-Zone Tube Furnace - PZF Series
Independently controlled heating zones for uniform or graded temperature profiles along the tube.
-
Hammer Mill - HM 1100
Impact grinding of brittle materials like grain, coal and minerals into consistent particle sizes.
-
Automatic Pellet Press - LP40T
Presses powders into uniform pellets for XRF and other analysis, with repeatable pressure.
-
Automatic Pellet Press - PP40
Presses powders into uniform pellets for XRF and other analysis, with repeatable pressure.
-
Rotary Sample Divider - RSD Series
Splits bulk samples into representative sub-samples for consistent, reliable analysis.
-
Sample Splitter - SS
Riffle division of granular materials into equal, representative portions.
-
Jaw Crusher - JC1000
Coarse and primary crushing of hard, brittle rocks, ores and minerals ahead of fine grinding.
-
Jaw Crusher - JC1100
Coarse and primary crushing of hard, brittle rocks, ores and minerals ahead of fine grinding.
-
Jaw Crusher - JC1200
Coarse and primary crushing of hard, brittle rocks, ores and minerals ahead of fine grinding.
-
Jaw Crusher - JC1300
Coarse and primary crushing of hard, brittle rocks, ores and minerals ahead of fine grinding.
-
Chamber Furnace - PLF Series
A general-purpose muffle furnace for ashing, drying and heat treatment in the laboratory.
-
Vibratory Disc Mill - VDM 1000 Series
Pulverises hard, brittle samples such as ores, rocks and slag to analytical fineness in minutes.
-
Vibratory Disc Mill - VDM 1100
Pulverises hard, brittle samples such as ores, rocks and slag to analytical fineness in minutes.
-
Vibratory Disc Mill - VDM 1200
Pulverises hard, brittle samples such as ores, rocks and slag to analytical fineness in minutes.
-
Tube Furnace - PTF Series
Heats samples in a tube under air, vacuum or controlled gas for synthesis and annealing.
-
Tube Furnace - STF Series
Heats samples in a tube under air, vacuum or controlled gas for synthesis and annealing.
-
Ashing Furnace - PAF Series
Burns off organic matter to measure ash content in coal, food, feed and polymers.
-
Disc Mill / Pulverizer - DM 1100
Continuous fine grinding of hard and brittle materials between rotating discs.
-
Ball Mill - BM Series
Reliable grinding and mixing of minerals, ores, soils and powders ahead of analysis.
-
Graphite Furnace - GRF
Ultra-high-temperature processing in an inert or vacuum atmosphere using graphite heating elements.
-
Vacuum Furnace - PVAC
Heat treatment, sintering and brazing under vacuum to prevent oxidation and contamination.
-
Atmosphere Controlled Furnace - ACF Series
Heat treatment under inert or reducing gases for oxidation-free sintering and annealing.
-
ElvaX Plus XRF Benchtop Spectrometer
Benchtop XRF for fast, non-destructive elemental analysis of metals, minerals and powders.
-
ElvaX Pro XRF Benchtop Spectrometer
Benchtop XRF with extended range and sensitivity for demanding elemental analysis.
-
ICP-OES - ICP 5000 DV
Measures many elements at trace levels in a single run, for environmental, food and materials testing.
-
High Temperature Chamber Furnace - MoS Series
Box furnace for sintering, ceramics and material testing at very high temperatures.
-
Multi-Zone Tube Furnace - PZF Series
Independently controlled heating zones for uniform or graded temperature profiles along the tube.
-
Chamber Furnace - PLF Series
A general-purpose muffle furnace for ashing, drying and heat treatment in the laboratory.
-
Vibratory Disc Mill - VDM Series
Pulverises hard, brittle samples such as ores, rocks and slag to analytical fineness in minutes.
-
Tube Furnace - PTF Series
Heats samples in a tube under air, vacuum or controlled gas for synthesis and annealing.
-
Tube Furnace - STF Series
Heats samples in a tube under air, vacuum or controlled gas for synthesis and annealing.
-
Ball Mill - BM Series
Reliable grinding and mixing of minerals, ores, soils and powders ahead of analysis.
-
Glass Fusion Furnace - PGLS Series
Fuses samples with flux into glass beads for highly accurate XRF analysis.
-
Chamber Furnace Eco - Eco Series
An economical chamber furnace for everyday ashing, drying and heat treatment.
-
MoS Series Chamber Furnace
High-temperature chamber furnace with molybdenum disilicide elements for ceramics and sintering.
-
Mortar Grinder - HG 1100
Grinds, mixes and triturates powders and pastes, reproducing manual mortar work consistently.
-
Vacuum Furnace - PVAC
Heat treatment, sintering and brazing under vacuum to prevent oxidation and contamination.
-
ElvaX Plus XRF Benchtop Spectrometer
Benchtop XRF for fast, non-destructive elemental analysis of metals, minerals and powders.
-
ElvaX Pro XRF Benchtop Spectrometer
Benchtop XRF with extended range and sensitivity for demanding elemental analysis.
-
ICP-OES - ICP 5000 DV
Measures many elements at trace levels in a single run, for environmental, food and materials testing.
-
ICP-MS - ICP-MS 5500
Ultra-trace and isotopic elemental measurement for the most demanding quality and research work.
-
Optical Emission Spectrometer (OES) - LABSPECTRO
Spark OES for fast, precise composition analysis of metals and alloys in production control.
-
Optical Emission Spectrometer (OES) - LABSPECTRO PRO
Spark OES for fast, precise composition analysis of metals and alloys in production control.
-
CHN Elemental Analyser - LCHN3600
Determines carbon, hydrogen and nitrogen content in organic and inorganic samples.
-
Infrared Carbon Sulfur Analyser - LCS 3500
Measures carbon and sulfur in steel, iron, alloys, ores and other inorganic materials.
-
IR Sulfur Analyser - LS3000/IR
Infrared determination of total sulfur in coal, coke, oils and other fuels.
-
Cutting Mill - C Series
Cuts soft, fibrous and heterogeneous materials such as plant matter, plastics and waste into uniform particles.
-
Tube Furnace - PTF/PZF/STF Series
Heats samples in a tube under air, vacuum or controlled gas for synthesis and annealing.
-
Micro Continuous Closed-Cup Flash Point Tester - FP CC-420AE
Determines the closed-cup flash point of fuels and solvents using small sample volumes.
-
Micro Vapor Pressure Tester - VP TE-1000AE
Measures the vapour pressure of fuels and volatile liquids for quality and safety compliance.
-
Ball Mill - BM Series
Reliable grinding and mixing of minerals, ores, soils and powders ahead of analysis.
-
Accelerating Rate Calorimeter - TAC-500AE
Studies thermal runaway and reaction hazards for process safety and battery testing.
-
Reaction Calorimeter - RC HP-1000AE
Measures the heat released by chemical reactions to support safe process scale-up.
-
20L Spherical Explosion Tester - ECD-20AE
Assesses the explosion severity of combustible dusts in a 20-litre sphere.
-
Dust Cloud Minimum Ignition Energy Tester - MIE-3000AE
Finds the minimum spark energy that ignites a dust cloud, for dust explosion safety.
-
Minimum Ignition Temperature Tester for Dust Clouds - MITC-1000AE
Determines the lowest surface temperature at which a dust cloud ignites.
-
CHN Elemental Analyser - LCHN3600
Determines carbon, hydrogen and nitrogen content in organic and inorganic samples.
-
Automatic Proximate Analyzer (TGA) - LPA4000
Automatically measures moisture, volatile matter, ash and fixed carbon in coal and biomass.
-
Infrared Carbon Sulfur Analyser - LCS 3500
Measures carbon and sulfur in steel, iron, alloys, ores and other inorganic materials.
-
IR Sulfur Analyser - LS3000/IR
Infrared determination of total sulfur in coal, coke, oils and other fuels.
-
Hammer Mill - HM 1100
Impact grinding of brittle materials like grain, coal and minerals into consistent particle sizes.
-
Vibratory Sieve Shaker - VS1100
Separates and measures particle size distribution with three-dimensional sieving motion.
-
Bomb Calorimeter - BCI-2000
Measures the gross calorific value of coal, fuels, biomass and food samples.
-
Automatic Bomb Calorimeter - BCI 2000/T
Automated calorific value testing with less operator time for busy fuel laboratories.
-
Fully Automatic Bomb Calorimeter - BCI 3000
Fully automated calorific value measurement for high-throughput fuel testing.
-
Rotary Sample Divider - RSD Series
Splits bulk samples into representative sub-samples for consistent, reliable analysis.
-
Sample Splitter - SS
Riffle division of granular materials into equal, representative portions.
-
Jaw Crusher - JC1000
Coarse and primary crushing of hard, brittle rocks, ores and minerals ahead of fine grinding.
-
Jaw Crusher - JC1100
Coarse and primary crushing of hard, brittle rocks, ores and minerals ahead of fine grinding.
-
Jaw Crusher - JC1200
Coarse and primary crushing of hard, brittle rocks, ores and minerals ahead of fine grinding.
-
Jaw Crusher - JC1300
Coarse and primary crushing of hard, brittle rocks, ores and minerals ahead of fine grinding.
-
Vibratory Disc Mill - VDM Series
Pulverises hard, brittle samples such as ores, rocks and slag to analytical fineness in minutes.
-
Portable Coal Quality Test Analyser - FC-KH-01
Portable testing of coal quality parameters at mines, ports and power plants.
-
Ash Fusion Furnace - LAF16
Determines the ash fusion temperatures of coal, coke and biomass to predict slagging behaviour.
-
Ashing Furnace - PAF Series
Burns off organic matter to measure ash content in coal, food, feed and polymers.
-
Disc Mill / Pulverizer - DM 1100
Continuous fine grinding of hard and brittle materials between rotating discs.
-
Cryogenic Ball Mill - CM1100
Grinds tough, elastic and temperature-sensitive samples under liquid-nitrogen cooling, keeping them intact.
-
Graphite Furnace - GRF
Ultra-high-temperature processing in an inert or vacuum atmosphere using graphite heating elements.
-
Vacuum Furnace - PVAC
Heat treatment, sintering and brazing under vacuum to prevent oxidation and contamination.
-
Atmosphere Controlled Furnace - ACF Series
Heat treatment under inert or reducing gases for oxidation-free sintering and annealing.
-
Modular Tube Furnace - MTF
A configurable tube furnace for annealing, synthesis and controlled-atmosphere work.
-
Modular Split Tube Furnace - ASP
A hinged tube furnace that opens for fast loading and cooling of tubes and reactors.
-
ElvaX Plus XRF Benchtop Spectrometer
Benchtop XRF for fast, non-destructive elemental analysis of metals, minerals and powders.
-
ElvaX Pro XRF Benchtop Spectrometer
Benchtop XRF with extended range and sensitivity for demanding elemental analysis.
-
ICP-OES - ICP 5000 DV
Measures many elements at trace levels in a single run, for environmental, food and materials testing.
-
ICP-MS - ICP-MS 5500
Ultra-trace and isotopic elemental measurement for the most demanding quality and research work.
-
Prospector 2 XRF Handheld Spectrometer
Handheld XRF for on-the-spot alloy identification, scrap sorting and precious metal testing.
-
Prospector 3 Handheld XRF Spectrometer
Portable XRF for rapid elemental analysis in the field, at the scrapyard or on the shop floor.
-
Optical Emission Spectrometer (OES) - LABSPECTRO
Spark OES for fast, precise composition analysis of metals and alloys in production control.
-
Optical Emission Spectrometer (OES) - LABSPECTRO PRO
Spark OES for fast, precise composition analysis of metals and alloys in production control.
-
High Temperature Chamber Furnace - MoS Series
Box furnace for sintering, ceramics and material testing at very high temperatures.
-
Ultra Centrifugal Mill - UCM1100
Rapid, gentle fine grinding of soft to medium-hard materials with minimal heat build-up.
-
Split Tube Furnace - ASP-W
Opens along its length to place and remove tubes quickly, ideal for reactor setups.
-
Mortar Grinder - HG 1100
Grinds, mixes and triturates powders and pastes, reproducing manual mortar work consistently.
-
ElvaX Plus XRF Benchtop Spectrometer
Benchtop XRF for fast, non-destructive elemental analysis of metals, minerals and powders.
-
ElvaX Pro XRF Benchtop Spectrometer
Benchtop XRF with extended range and sensitivity for demanding elemental analysis.
-
ICP-OES - ICP 5000 DV
Measures many elements at trace levels in a single run, for environmental, food and materials testing.
-
ICP-MS - ICP-MS 5500
Ultra-trace and isotopic elemental measurement for the most demanding quality and research work.
-
Prospector 2 XRF Handheld Spectrometer
Handheld XRF for on-the-spot alloy identification, scrap sorting and precious metal testing.
-
Prospector 3 Handheld XRF Spectrometer
Portable XRF for rapid elemental analysis in the field, at the scrapyard or on the shop floor.
-
CHN Elemental Analyser - LCHN3600
Determines carbon, hydrogen and nitrogen content in organic and inorganic samples.
-
Automatic Proximate Analyzer (TGA) - LPA4000
Automatically measures moisture, volatile matter, ash and fixed carbon in coal and biomass.
-
Infrared Carbon Sulfur Analyser - LCS 3500
Measures carbon and sulfur in steel, iron, alloys, ores and other inorganic materials.
-
IR Sulfur Analyser - LS3000/IR
Infrared determination of total sulfur in coal, coke, oils and other fuels.
-
Cutting Mill - C10
Cuts soft, fibrous and heterogeneous materials such as plant matter, plastics and waste into uniform particles.
-
Cutting Mill - C25
Cuts soft, fibrous and heterogeneous materials such as plant matter, plastics and waste into uniform particles.
-
Cutting Mill - C90
Cuts soft, fibrous and heterogeneous materials such as plant matter, plastics and waste into uniform particles.
-
Knife Mill - KM1100
Homogenises food, feed and moist samples with rotating blades for representative analysis.
-
Knife Mill - KM1300
Homogenises food, feed and moist samples with rotating blades for representative analysis.
-
Vibratory Sieve Shaker - VS1100
Separates and measures particle size distribution with three-dimensional sieving motion.
-
Air Jet Sieve Shaker - JS1100
Air-jet sieving for fine, dry powders that clog or agglomerate on conventional sieves.
-
Jaw Crusher - JC1000–JC1300
Coarse and primary crushing of hard, brittle rocks, ores and minerals ahead of fine grinding.
-
Portable Coal Quality Test Analyser - FC-KH-01
Portable testing of coal quality parameters at mines, ports and power plants.
-
ICP-OES - ICP 5000 DV
Measures many elements at trace levels in a single run, for environmental, food and materials testing.
-
ICP-MS - ICP-MS 5500
Ultra-trace and isotopic elemental measurement for the most demanding quality and research work.
-
CHN Elemental Analyser - LCHN3600
Determines carbon, hydrogen and nitrogen content in organic and inorganic samples.
-
Automatic Proximate Analyzer (TGA) - LPA4000
Automatically measures moisture, volatile matter, ash and fixed carbon in coal and biomass.
-
Cutting Mill - C10/C25/C90
Cuts soft, fibrous and heterogeneous materials such as plant matter, plastics and waste into uniform particles.
-
Knife Mill - KM1100/KM1300
Homogenises food, feed and moist samples with rotating blades for representative analysis.
-
Ultra Centrifugal Mill - UCM1100
Rapid, gentle fine grinding of soft to medium-hard materials with minimal heat build-up.
-
Vibratory Sieve Shaker - VS1100
Separates and measures particle size distribution with three-dimensional sieving motion.
-
Air Jet Sieve Shaker - JS1100
Air-jet sieving for fine, dry powders that clog or agglomerate on conventional sieves.
-
Bomb Calorimeter - BCI-2000
Measures the gross calorific value of coal, fuels, biomass and food samples.
-
Automatic Bomb Calorimeter - BCI 2000/T
Automated calorific value testing with less operator time for busy fuel laboratories.
-
Fully Automatic Bomb Calorimeter - BCI 3000
Fully automated calorific value measurement for high-throughput fuel testing.
-
Ball Mill - BM Series
Reliable grinding and mixing of minerals, ores, soils and powders ahead of analysis.
-
Mortar Grinder - HG 1100
Grinds, mixes and triturates powders and pastes, reproducing manual mortar work consistently.
-
Cyclone Mill Twister - TW1100
Fast grinding of grain, feed and food with cyclone separation, suited to NIR and nutrient analysis.
-
ICP-OES - ICP 5000 DV
Measures many elements at trace levels in a single run, for environmental, food and materials testing.
-
ICP-MS - ICP-MS 5500
Ultra-trace and isotopic elemental measurement for the most demanding quality and research work.
-
CHN Elemental Analyser - LCHN3600
Determines carbon, hydrogen and nitrogen content in organic and inorganic samples.
-
Automatic Proximate Analyzer (TGA) - LPA4000
Automatically measures moisture, volatile matter, ash and fixed carbon in coal and biomass.
-
Cutting Mill - C10/C25/C90
Cuts soft, fibrous and heterogeneous materials such as plant matter, plastics and waste into uniform particles.
-
Hammer Mill - HM 1100
Impact grinding of brittle materials like grain, coal and minerals into consistent particle sizes.
-
Knife Mill - KM1100/KM1300
Homogenises food, feed and moist samples with rotating blades for representative analysis.
-
Ultra Centrifugal Mill - UCM1100
Rapid, gentle fine grinding of soft to medium-hard materials with minimal heat build-up.
-
Vibratory Sieve Shaker - VS1100
Separates and measures particle size distribution with three-dimensional sieving motion.
-
Air Jet Sieve Shaker - JS1100
Air-jet sieving for fine, dry powders that clog or agglomerate on conventional sieves.
-
Bomb Calorimeter - BCI-2000
Measures the gross calorific value of coal, fuels, biomass and food samples.
-
Automatic Bomb Calorimeter - BCI 2000/T
Automated calorific value testing with less operator time for busy fuel laboratories.
-
Fully Automatic Bomb Calorimeter - BCI 3000
Fully automated calorific value measurement for high-throughput fuel testing.
-
Ball Mill - BM Series
Reliable grinding and mixing of minerals, ores, soils and powders ahead of analysis.
-
Cyclone Mill Twister - TW1100
Fast grinding of grain, feed and food with cyclone separation, suited to NIR and nutrient analysis.
-
Graphite Furnace - GRF
Ultra-high-temperature processing in an inert or vacuum atmosphere using graphite heating elements.
-
Vacuum Furnace - PVAC
Heat treatment, sintering and brazing under vacuum to prevent oxidation and contamination.
-
Atmosphere Controlled Furnace - ACF Series
Heat treatment under inert or reducing gases for oxidation-free sintering and annealing.
-
ElvaX Plus XRF Benchtop Spectrometer
Benchtop XRF for fast, non-destructive elemental analysis of metals, minerals and powders.
-
ElvaX Pro XRF Benchtop Spectrometer
Benchtop XRF with extended range and sensitivity for demanding elemental analysis.
-
ICP-OES - ICP 5000 DV
Measures many elements at trace levels in a single run, for environmental, food and materials testing.
-
ICP-MS - ICP-MS 5500
Ultra-trace and isotopic elemental measurement for the most demanding quality and research work.
-
Prospector 2 XRF Handheld Spectrometer
Handheld XRF for on-the-spot alloy identification, scrap sorting and precious metal testing.
-
Prospector 3 Handheld XRF Spectrometer
Portable XRF for rapid elemental analysis in the field, at the scrapyard or on the shop floor.
-
Optical Emission Spectrometer (OES) - LABSPECTRO
Spark OES for fast, precise composition analysis of metals and alloys in production control.
-
Optical Emission Spectrometer (OES) - LABSPECTRO PRO
Spark OES for fast, precise composition analysis of metals and alloys in production control.
-
High Temperature Chamber Furnace - MoS Series
Box furnace for sintering, ceramics and material testing at very high temperatures.
-
Heat Treatment Furnace - HDF Series
Hardening, tempering and annealing of metal parts with precise temperature control.
-
Heat Treatment Furnace - HLF Series
Hardening, tempering and annealing of metal parts with precise temperature control.
-
Jaw Crusher - JC1000–JC1300
Coarse and primary crushing of hard, brittle rocks, ores and minerals ahead of fine grinding.
-
Chamber Furnace - PLF Series
A general-purpose muffle furnace for ashing, drying and heat treatment in the laboratory.
-
Vibratory Disc Mill - VDM Series
Pulverises hard, brittle samples such as ores, rocks and slag to analytical fineness in minutes.
-
ElvaX Plus XRF Benchtop Spectrometer
Benchtop XRF for fast, non-destructive elemental analysis of metals, minerals and powders.
-
ElvaX Pro XRF Benchtop Spectrometer
Benchtop XRF with extended range and sensitivity for demanding elemental analysis.
-
ICP-OES - ICP 5000 DV
Measures many elements at trace levels in a single run, for environmental, food and materials testing.
-
ICP-MS - ICP-MS 5500
Ultra-trace and isotopic elemental measurement for the most demanding quality and research work.
-
Optical Emission Spectrometer (OES) - LABSPECTRO
Spark OES for fast, precise composition analysis of metals and alloys in production control.
-
Optical Emission Spectrometer (OES) - LABSPECTRO PRO
Spark OES for fast, precise composition analysis of metals and alloys in production control.
-
CHN Elemental Analyser - LCHN3600
Determines carbon, hydrogen and nitrogen content in organic and inorganic samples.
-
Infrared Carbon Sulfur Analyser - LCS 3500
Measures carbon and sulfur in steel, iron, alloys, ores and other inorganic materials.
-
IR Sulfur Analyser - LS3000/IR
Infrared determination of total sulfur in coal, coke, oils and other fuels.
-
Bomb Calorimeter - BCI-2000
Measures the gross calorific value of coal, fuels, biomass and food samples.
-
Automatic Bomb Calorimeter - BCI 2000/T
Automated calorific value testing with less operator time for busy fuel laboratories.
-
Fully Automatic Bomb Calorimeter - BCI 3000
Fully automated calorific value measurement for high-throughput fuel testing.
-
Micro Continuous Closed-Cup Flash Point Tester - FP CC-420AE
Determines the closed-cup flash point of fuels and solvents using small sample volumes.
-
Micro Vapor Pressure Tester - VP TE-1000AE
Measures the vapour pressure of fuels and volatile liquids for quality and safety compliance.
-
High Energy Ball Mill - MM1600
High-impact milling for fast size reduction, mechanical alloying and the synthesis of new materials.
-
Cryogenic Ball Mill - CM1100
Grinds tough, elastic and temperature-sensitive samples under liquid-nitrogen cooling, keeping them intact.
-
ElvaX Plus XRF Benchtop Spectrometer
Benchtop XRF for fast, non-destructive elemental analysis of metals, minerals and powders.
-
ElvaX Pro XRF Benchtop Spectrometer
Benchtop XRF with extended range and sensitivity for demanding elemental analysis.
-
ICP-OES - ICP 5000 DV
Measures many elements at trace levels in a single run, for environmental, food and materials testing.
-
ICP-MS - ICP-MS 5500
Ultra-trace and isotopic elemental measurement for the most demanding quality and research work.
-
Prospector 2 XRF Handheld Spectrometer
Handheld XRF for on-the-spot alloy identification, scrap sorting and precious metal testing.
-
Prospector 3 Handheld XRF Spectrometer
Portable XRF for rapid elemental analysis in the field, at the scrapyard or on the shop floor.
-
Optical Emission Spectrometer (OES) - LABSPECTRO
Spark OES for fast, precise composition analysis of metals and alloys in production control.
-
Optical Emission Spectrometer (OES) - LABSPECTRO PRO
Spark OES for fast, precise composition analysis of metals and alloys in production control.
-
Micro Ball Mill - MM1100
Quick grinding and homogenising of small sample volumes, ideal for routine laboratory preparation.
-
Vibratory Sieve Shaker - VS1100
Separates and measures particle size distribution with three-dimensional sieving motion.
-
Automatic Pellet Press - LP40T
Presses powders into uniform pellets for XRF and other analysis, with repeatable pressure.
-
Automatic Pellet Press - PP40
Presses powders into uniform pellets for XRF and other analysis, with repeatable pressure.
-
Rotary Sample Divider - RSD Series
Splits bulk samples into representative sub-samples for consistent, reliable analysis.
-
Sample Splitter - SS
Riffle division of granular materials into equal, representative portions.
-
Jaw Crusher - JC1000
Coarse and primary crushing of hard, brittle rocks, ores and minerals ahead of fine grinding.
-
Jaw Crusher - JC1100
Coarse and primary crushing of hard, brittle rocks, ores and minerals ahead of fine grinding.
-
Jaw Crusher - JC1200
Coarse and primary crushing of hard, brittle rocks, ores and minerals ahead of fine grinding.
-
Jaw Crusher - JC1300
Coarse and primary crushing of hard, brittle rocks, ores and minerals ahead of fine grinding.
-
Vibratory Disc Mill - VDM Series
Pulverises hard, brittle samples such as ores, rocks and slag to analytical fineness in minutes.
-
Disc Mill / Pulverizer - DM 1100
Continuous fine grinding of hard and brittle materials between rotating discs.
-
Cryogenic Ball Mill - CM1100
Grinds tough, elastic and temperature-sensitive samples under liquid-nitrogen cooling, keeping them intact.
-
Graphite Furnace - GRF
Ultra-high-temperature processing in an inert or vacuum atmosphere using graphite heating elements.
-
Vacuum Furnace - PVAC
Heat treatment, sintering and brazing under vacuum to prevent oxidation and contamination.
-
Atmosphere Controlled Furnace - ACF Series
Heat treatment under inert or reducing gases for oxidation-free sintering and annealing.
-
ElvaX Plus XRF Benchtop Spectrometer
Benchtop XRF for fast, non-destructive elemental analysis of metals, minerals and powders.
-
ElvaX Pro XRF Benchtop Spectrometer
Benchtop XRF with extended range and sensitivity for demanding elemental analysis.
-
ICP-OES - ICP 5000 DV
Measures many elements at trace levels in a single run, for environmental, food and materials testing.
-
ICP-MS - ICP-MS 5500
Ultra-trace and isotopic elemental measurement for the most demanding quality and research work.
-
Prospector 2 XRF Handheld Spectrometer
Handheld XRF for on-the-spot alloy identification, scrap sorting and precious metal testing.
-
Prospector 3 Handheld XRF Spectrometer
Portable XRF for rapid elemental analysis in the field, at the scrapyard or on the shop floor.
-
Optical Emission Spectrometer (OES) - LABSPECTRO
Spark OES for fast, precise composition analysis of metals and alloys in production control.
-
Optical Emission Spectrometer (OES) - LABSPECTRO PRO
Spark OES for fast, precise composition analysis of metals and alloys in production control.
-
High Temperature Chamber Furnace - MoS Series
Box furnace for sintering, ceramics and material testing at very high temperatures.
-
Heat Treatment Furnace - HDF Series
Hardening, tempering and annealing of metal parts with precise temperature control.
-
Heat Treatment Furnace - HLF Series
Hardening, tempering and annealing of metal parts with precise temperature control.
-
Jaw Crusher - JC1000–JC1300
Coarse and primary crushing of hard, brittle rocks, ores and minerals ahead of fine grinding.
-
Chamber Furnace - PLF Series
A general-purpose muffle furnace for ashing, drying and heat treatment in the laboratory.
-
Vibratory Disc Mill - VDM Series
Pulverises hard, brittle samples such as ores, rocks and slag to analytical fineness in minutes.
-
ElvaX Plus XRF Benchtop Spectrometer
Benchtop XRF for fast, non-destructive elemental analysis of metals, minerals and powders.
-
ElvaX Pro XRF Benchtop Spectrometer
Benchtop XRF with extended range and sensitivity for demanding elemental analysis.
-
ICP-OES - ICP 5000 DV
Measures many elements at trace levels in a single run, for environmental, food and materials testing.
-
ICP-MS - ICP-MS 5500
Ultra-trace and isotopic elemental measurement for the most demanding quality and research work.
-
Prospector 2 XRF Handheld Spectrometer
Handheld XRF for on-the-spot alloy identification, scrap sorting and precious metal testing.
-
Prospector 3 Handheld XRF Spectrometer
Portable XRF for rapid elemental analysis in the field, at the scrapyard or on the shop floor.
-
Optical Emission Spectrometer (OES) - LABSPECTRO
Spark OES for fast, precise composition analysis of metals and alloys in production control.
-
Optical Emission Spectrometer (OES) - LABSPECTRO PRO
Spark OES for fast, precise composition analysis of metals and alloys in production control.
-
Hammer Mill - HM 1100
Impact grinding of brittle materials like grain, coal and minerals into consistent particle sizes.
-
Vibratory Sieve Shaker - VS1100
Separates and measures particle size distribution with three-dimensional sieving motion.
-
Air Jet Sieve Shaker - JS1100
Air-jet sieving for fine, dry powders that clog or agglomerate on conventional sieves.
-
Automatic Pellet Press - LP40T
Presses powders into uniform pellets for XRF and other analysis, with repeatable pressure.
-
Automatic Pellet Press - PP40
Presses powders into uniform pellets for XRF and other analysis, with repeatable pressure.
-
Rotary Sample Divider - RSD Series
Splits bulk samples into representative sub-samples for consistent, reliable analysis.
-
Sample Splitter - SS
Riffle division of granular materials into equal, representative portions.
-
Jaw Crusher - JC1000
Coarse and primary crushing of hard, brittle rocks, ores and minerals ahead of fine grinding.
-
Jaw Crusher - JC1100
Coarse and primary crushing of hard, brittle rocks, ores and minerals ahead of fine grinding.
-
Jaw Crusher - JC1200
Coarse and primary crushing of hard, brittle rocks, ores and minerals ahead of fine grinding.
-
Jaw Crusher - JC1300
Coarse and primary crushing of hard, brittle rocks, ores and minerals ahead of fine grinding.
-
Vibratory Disc Mill - VDM Series
Pulverises hard, brittle samples such as ores, rocks and slag to analytical fineness in minutes.
-
Disc Mill / Pulverizer - DM 1100
Continuous fine grinding of hard and brittle materials between rotating discs.
-
Ball Mill - BM Series
Reliable grinding and mixing of minerals, ores, soils and powders ahead of analysis.
-
Mortar Grinder - HG 1100
Grinds, mixes and triturates powders and pastes, reproducing manual mortar work consistently.
-
Graphite Furnace - GRF
Ultra-high-temperature processing in an inert or vacuum atmosphere using graphite heating elements.
-
Vacuum Furnace - PVAC
Heat treatment, sintering and brazing under vacuum to prevent oxidation and contamination.
-
Atmosphere Controlled Furnace - ACF Series
Heat treatment under inert or reducing gases for oxidation-free sintering and annealing.
-
ElvaX Plus XRF Benchtop Spectrometer
Benchtop XRF for fast, non-destructive elemental analysis of metals, minerals and powders.
-
ElvaX Pro XRF Benchtop Spectrometer
Benchtop XRF with extended range and sensitivity for demanding elemental analysis.
-
ICP-OES - ICP 5000 DV
Measures many elements at trace levels in a single run, for environmental, food and materials testing.
-
ICP-MS - ICP-MS 5500
Ultra-trace and isotopic elemental measurement for the most demanding quality and research work.
-
Prospector 2 XRF Handheld Spectrometer
Handheld XRF for on-the-spot alloy identification, scrap sorting and precious metal testing.
-
Prospector 3 Handheld XRF Spectrometer
Portable XRF for rapid elemental analysis in the field, at the scrapyard or on the shop floor.
-
Optical Emission Spectrometer (OES) - LABSPECTRO
Spark OES for fast, precise composition analysis of metals and alloys in production control.
-
Optical Emission Spectrometer (OES) - LABSPECTRO PRO
Spark OES for fast, precise composition analysis of metals and alloys in production control.
-
Heat Treatment Furnace - HDF Series
Hardening, tempering and annealing of metal parts with precise temperature control.
-
Heat Treatment Furnace - HLF Series
Hardening, tempering and annealing of metal parts with precise temperature control.
-
Jaw Crusher - JC1000–JC1300
Coarse and primary crushing of hard, brittle rocks, ores and minerals ahead of fine grinding.
-
Vibratory Disc Mill - VDM Series
Pulverises hard, brittle samples such as ores, rocks and slag to analytical fineness in minutes.
-
Ball Mill - BM Series
Reliable grinding and mixing of minerals, ores, soils and powders ahead of analysis.
-
ElvaX Plus XRF Benchtop Spectrometer
Benchtop XRF for fast, non-destructive elemental analysis of metals, minerals and powders.
-
ElvaX Pro XRF Benchtop Spectrometer
Benchtop XRF with extended range and sensitivity for demanding elemental analysis.
-
ICP-OES - ICP 5000 DV
Measures many elements at trace levels in a single run, for environmental, food and materials testing.
-
ICP-MS - ICP-MS 5500
Ultra-trace and isotopic elemental measurement for the most demanding quality and research work.
-
Optical Emission Spectrometer (OES) - LABSPECTRO
Spark OES for fast, precise composition analysis of metals and alloys in production control.
-
Optical Emission Spectrometer (OES) - LABSPECTRO PRO
Spark OES for fast, precise composition analysis of metals and alloys in production control.
-
CHN Elemental Analyser - LCHN3600
Determines carbon, hydrogen and nitrogen content in organic and inorganic samples.
-
Infrared Carbon Sulfur Analyser - LCS 3500
Measures carbon and sulfur in steel, iron, alloys, ores and other inorganic materials.
-
IR Sulfur Analyser - LS3000/IR
Infrared determination of total sulfur in coal, coke, oils and other fuels.
-
Bomb Calorimeter - BCI-2000
Measures the gross calorific value of coal, fuels, biomass and food samples.
-
Automatic Bomb Calorimeter - BCI 2000/T
Automated calorific value testing with less operator time for busy fuel laboratories.
-
Fully Automatic Bomb Calorimeter - BCI 3000
Fully automated calorific value measurement for high-throughput fuel testing.
-
Tube Furnace - PTF/PZF/STF Series
Heats samples in a tube under air, vacuum or controlled gas for synthesis and annealing.
-
Micro Continuous Closed-Cup Flash Point Tester - FP CC-420AE
Determines the closed-cup flash point of fuels and solvents using small sample volumes.
-
Micro Vapor Pressure Tester - VP TE-1000AE
Measures the vapour pressure of fuels and volatile liquids for quality and safety compliance.
-
ElvaX Plus XRF Benchtop Spectrometer
Benchtop XRF for fast, non-destructive elemental analysis of metals, minerals and powders.
-
ElvaX Pro XRF Benchtop Spectrometer
Benchtop XRF with extended range and sensitivity for demanding elemental analysis.
-
ICP-OES - ICP 5000 DV
Measures many elements at trace levels in a single run, for environmental, food and materials testing.
-
ICP-MS - ICP-MS 5500
Ultra-trace and isotopic elemental measurement for the most demanding quality and research work.
-
Optical Emission Spectrometer (OES) - LABSPECTRO
Spark OES for fast, precise composition analysis of metals and alloys in production control.
-
Optical Emission Spectrometer (OES) - LABSPECTRO PRO
Spark OES for fast, precise composition analysis of metals and alloys in production control.
-
CHN Elemental Analyser - LCHN3600
Determines carbon, hydrogen and nitrogen content in organic and inorganic samples.
-
Infrared Carbon Sulfur Analyser - LCS 3500
Measures carbon and sulfur in steel, iron, alloys, ores and other inorganic materials.
-
IR Sulfur Analyser - LS3000/IR
Infrared determination of total sulfur in coal, coke, oils and other fuels.
-
Bomb Calorimeter - BCI-2000
Measures the gross calorific value of coal, fuels, biomass and food samples.
-
Automatic Bomb Calorimeter - BCI 2000/T
Automated calorific value testing with less operator time for busy fuel laboratories.
-
Fully Automatic Bomb Calorimeter - BCI 3000
Fully automated calorific value measurement for high-throughput fuel testing.
-
Tube Furnace - PTF/PZF/STF Series
Heats samples in a tube under air, vacuum or controlled gas for synthesis and annealing.
-
Micro Continuous Closed-Cup Flash Point Tester - FP CC-420AE
Determines the closed-cup flash point of fuels and solvents using small sample volumes.
-
Micro Vapor Pressure Tester - VP TE-1000AE
Measures the vapour pressure of fuels and volatile liquids for quality and safety compliance.
-
Planetary Nano Ball Mill - BM2200+
Grinds and mixes powders down to the nanometre range, for advanced materials research and sample preparation.
-
Cryogenic Ball Mill - CM1100
Grinds tough, elastic and temperature-sensitive samples under liquid-nitrogen cooling, keeping them intact.
-
ElvaX Plus XRF Benchtop Spectrometer
Benchtop XRF for fast, non-destructive elemental analysis of metals, minerals and powders.
-
ElvaX Pro XRF Benchtop Spectrometer
Benchtop XRF with extended range and sensitivity for demanding elemental analysis.
-
ICP-OES - ICP 5000 DV
Measures many elements at trace levels in a single run, for environmental, food and materials testing.
-
ICP-MS - ICP-MS 5500
Ultra-trace and isotopic elemental measurement for the most demanding quality and research work.
-
Micro Ball Mill - MM1100
Quick grinding and homogenising of small sample volumes, ideal for routine laboratory preparation.
-
Cutting Mill - C10/C25/C90
Cuts soft, fibrous and heterogeneous materials such as plant matter, plastics and waste into uniform particles.
-
Knife Mill - KM1100/KM1300
Homogenises food, feed and moist samples with rotating blades for representative analysis.
-
Ultra Centrifugal Mill - UCM1100
Rapid, gentle fine grinding of soft to medium-hard materials with minimal heat build-up.
-
Vibratory Sieve Shaker - VS1100
Separates and measures particle size distribution with three-dimensional sieving motion.
-
Air Jet Sieve Shaker - JS1100
Air-jet sieving for fine, dry powders that clog or agglomerate on conventional sieves.
-
Chamber Furnace - PLF Series
A general-purpose muffle furnace for ashing, drying and heat treatment in the laboratory.
-
Tube Furnace - PTF/PZF/STF Series
Heats samples in a tube under air, vacuum or controlled gas for synthesis and annealing.
-
Ball Mill - BM Series
Reliable grinding and mixing of minerals, ores, soils and powders ahead of analysis.
-
Chamber Furnace Eco - Eco Series
An economical chamber furnace for everyday ashing, drying and heat treatment.
-
Mortar Grinder - HG 1100
Grinds, mixes and triturates powders and pastes, reproducing manual mortar work consistently.
-
Cyclone Mill Twister - TW1100
Fast grinding of grain, feed and food with cyclone separation, suited to NIR and nutrient analysis.
-
Cryogenic Ball Mill - CM1100
Grinds tough, elastic and temperature-sensitive samples under liquid-nitrogen cooling, keeping them intact.
-
ElvaX Plus XRF Benchtop Spectrometer
Benchtop XRF for fast, non-destructive elemental analysis of metals, minerals and powders.
-
ElvaX Pro XRF Benchtop Spectrometer
Benchtop XRF with extended range and sensitivity for demanding elemental analysis.
-
ICP-OES - ICP 5000 DV
Measures many elements at trace levels in a single run, for environmental, food and materials testing.
-
ICP-MS - ICP-MS 5500
Ultra-trace and isotopic elemental measurement for the most demanding quality and research work.
-
CHN Elemental Analyser - LCHN3600
Determines carbon, hydrogen and nitrogen content in organic and inorganic samples.
-
Cutting Mill - C10
Cuts soft, fibrous and heterogeneous materials such as plant matter, plastics and waste into uniform particles.
-
Cutting Mill - C25
Cuts soft, fibrous and heterogeneous materials such as plant matter, plastics and waste into uniform particles.
-
Cutting Mill - C90
Cuts soft, fibrous and heterogeneous materials such as plant matter, plastics and waste into uniform particles.
-
Hammer Mill - HM 1100
Impact grinding of brittle materials like grain, coal and minerals into consistent particle sizes.
-
Knife Mill - KM1100
Homogenises food, feed and moist samples with rotating blades for representative analysis.
-
Knife Mill - KM1300
Homogenises food, feed and moist samples with rotating blades for representative analysis.
-
Ultra Centrifugal Mill - UCM1100
Rapid, gentle fine grinding of soft to medium-hard materials with minimal heat build-up.
-
Vibratory Sieve Shaker - VS1100
Separates and measures particle size distribution with three-dimensional sieving motion.
-
Air Jet Sieve Shaker - JS1100
Air-jet sieving for fine, dry powders that clog or agglomerate on conventional sieves.
-
Ball Mill - BM Series
Reliable grinding and mixing of minerals, ores, soils and powders ahead of analysis.
-
Accelerating Rate Calorimeter - TAC-500AE
Studies thermal runaway and reaction hazards for process safety and battery testing.
-
Reaction Calorimeter - RC HP-1000AE
Measures the heat released by chemical reactions to support safe process scale-up.
-
20L Spherical Explosion Tester - ECD-20AE
Assesses the explosion severity of combustible dusts in a 20-litre sphere.
-
Dust Cloud Minimum Ignition Energy Tester - MIE-3000AE
Finds the minimum spark energy that ignites a dust cloud, for dust explosion safety.
-
Minimum Ignition Temperature Tester for Dust Clouds - MITC-1000AE
Determines the lowest surface temperature at which a dust cloud ignites.
-
Cyclone Mill Twister - TW1100
Fast grinding of grain, feed and food with cyclone separation, suited to NIR and nutrient analysis.
-
Planetary Nano Ball Mill - BM2200+
Grinds and mixes powders down to the nanometre range, for advanced materials research and sample preparation.
-
High Energy Ball Mill - MM1600
High-impact milling for fast size reduction, mechanical alloying and the synthesis of new materials.
-
Planetary Ball Mill - BM 1500+ Series
Fine grinding, mixing and homogenising of hard, brittle and fibrous samples, wet or dry.
-
Planetary Ball Mill - BM1150+
Fine grinding, mixing and homogenising of hard, brittle and fibrous samples, wet or dry.
-
Planetary Ball Mill - BM 1100+
Fine grinding, mixing and homogenising of hard, brittle and fibrous samples, wet or dry.
-
Planetary Ball Mill - BM 1200+
Fine grinding, mixing and homogenising of hard, brittle and fibrous samples, wet or dry.
-
Planetary Ball Mill - BM 1400+
Fine grinding, mixing and homogenising of hard, brittle and fibrous samples, wet or dry.
-
Cryogenic Ball Mill - CM1100
Grinds tough, elastic and temperature-sensitive samples under liquid-nitrogen cooling, keeping them intact.
-
Micro Ball Mill - MM1100
Quick grinding and homogenising of small sample volumes, ideal for routine laboratory preparation.
-
Ultra Centrifugal Mill - UCM1100
Rapid, gentle fine grinding of soft to medium-hard materials with minimal heat build-up.
-
Vibratory Sieve Shaker - VS1100
Separates and measures particle size distribution with three-dimensional sieving motion.
-
Air Jet Sieve Shaker - JS1100
Air-jet sieving for fine, dry powders that clog or agglomerate on conventional sieves.
-
Automatic Pellet Press - LP40T
Presses powders into uniform pellets for XRF and other analysis, with repeatable pressure.
-
Automatic Pellet Press - PP40
Presses powders into uniform pellets for XRF and other analysis, with repeatable pressure.
-
Rotary Sample Divider - RSD Series
Splits bulk samples into representative sub-samples for consistent, reliable analysis.
-
Sample Splitter - SS
Riffle division of granular materials into equal, representative portions.
-
Jaw Crusher - JC1000–JC1300
Coarse and primary crushing of hard, brittle rocks, ores and minerals ahead of fine grinding.
-
Vibratory Disc Mill - VDM 1000 Series
Pulverises hard, brittle samples such as ores, rocks and slag to analytical fineness in minutes.
-
Vibratory Disc Mill - VDM 1100
Pulverises hard, brittle samples such as ores, rocks and slag to analytical fineness in minutes.
-
Vibratory Disc Mill - VDM 1200
Pulverises hard, brittle samples such as ores, rocks and slag to analytical fineness in minutes.
-
Disc Mill / Pulverizer - DM 1100
Continuous fine grinding of hard and brittle materials between rotating discs.
-
Mortar Grinder - HG 1100
Grinds, mixes and triturates powders and pastes, reproducing manual mortar work consistently.
-
Graphite Furnace - GRF
Ultra-high-temperature processing in an inert or vacuum atmosphere using graphite heating elements.
-
Vacuum Furnace - PVAC
Heat treatment, sintering and brazing under vacuum to prevent oxidation and contamination.
-
ElvaX Plus XRF Benchtop Spectrometer
Benchtop XRF for fast, non-destructive elemental analysis of metals, minerals and powders.
-
ElvaX Pro XRF Benchtop Spectrometer
Benchtop XRF with extended range and sensitivity for demanding elemental analysis.
-
ICP-OES - ICP 5000 DV
Measures many elements at trace levels in a single run, for environmental, food and materials testing.
-
ICP-MS - ICP-MS 5500
Ultra-trace and isotopic elemental measurement for the most demanding quality and research work.
-
Prospector 2 XRF Handheld Spectrometer
Handheld XRF for on-the-spot alloy identification, scrap sorting and precious metal testing.
-
Prospector 3 Handheld XRF Spectrometer
Portable XRF for rapid elemental analysis in the field, at the scrapyard or on the shop floor.
-
Optical Emission Spectrometer (OES) - LABSPECTRO
Spark OES for fast, precise composition analysis of metals and alloys in production control.
-
Optical Emission Spectrometer (OES) - LABSPECTRO PRO
Spark OES for fast, precise composition analysis of metals and alloys in production control.
-
High Temperature Chamber Furnace - MoS Series
Box furnace for sintering, ceramics and material testing at very high temperatures.
-
Micro Ball Mill - MM1100
Quick grinding and homogenising of small sample volumes, ideal for routine laboratory preparation.
-
Chamber Furnace - PLF Series
A general-purpose muffle furnace for ashing, drying and heat treatment in the laboratory.
-
Ball Mill - BM Series
Reliable grinding and mixing of minerals, ores, soils and powders ahead of analysis.
-
Mortar Grinder - HG 1100
Grinds, mixes and triturates powders and pastes, reproducing manual mortar work consistently.
-
ElvaX Plus XRF Benchtop Spectrometer
Benchtop XRF for fast, non-destructive elemental analysis of metals, minerals and powders.
-
ElvaX Pro XRF Benchtop Spectrometer
Benchtop XRF with extended range and sensitivity for demanding elemental analysis.
-
ICP-OES - ICP 5000 DV
Measures many elements at trace levels in a single run, for environmental, food and materials testing.
-
ICP-MS - ICP-MS 5500
Ultra-trace and isotopic elemental measurement for the most demanding quality and research work.
-
Prospector 2 XRF Handheld Spectrometer
Handheld XRF for on-the-spot alloy identification, scrap sorting and precious metal testing.
-
Prospector 3 Handheld XRF Spectrometer
Portable XRF for rapid elemental analysis in the field, at the scrapyard or on the shop floor.
-
Optical Emission Spectrometer (OES) - LABSPECTRO
Spark OES for fast, precise composition analysis of metals and alloys in production control.
-
Optical Emission Spectrometer (OES) - LABSPECTRO PRO
Spark OES for fast, precise composition analysis of metals and alloys in production control.
-
CHN Elemental Analyser - LCHN3600
Determines carbon, hydrogen and nitrogen content in organic and inorganic samples.
-
Automatic Proximate Analyzer (TGA) - LPA4000
Automatically measures moisture, volatile matter, ash and fixed carbon in coal and biomass.
-
Infrared Carbon Sulfur Analyser - LCS 3500
Measures carbon and sulfur in steel, iron, alloys, ores and other inorganic materials.
-
IR Sulfur Analyser - LS3000/IR
Infrared determination of total sulfur in coal, coke, oils and other fuels.
-
Cutting Mill - C Series
Cuts soft, fibrous and heterogeneous materials such as plant matter, plastics and waste into uniform particles.
-
Vibratory Sieve Shaker - VS1100
Separates and measures particle size distribution with three-dimensional sieving motion.
-
Air Jet Sieve Shaker - JS1100
Air-jet sieving for fine, dry powders that clog or agglomerate on conventional sieves.
-
Bomb Calorimeter - BCI-2000
Measures the gross calorific value of coal, fuels, biomass and food samples.
-
Automatic Bomb Calorimeter - BCI 2000/T
Automated calorific value testing with less operator time for busy fuel laboratories.
-
Fully Automatic Bomb Calorimeter - BCI 3000
Fully automated calorific value measurement for high-throughput fuel testing.
-
Automatic Pellet Press - LP40T
Presses powders into uniform pellets for XRF and other analysis, with repeatable pressure.
-
Automatic Pellet Press - PP40
Presses powders into uniform pellets for XRF and other analysis, with repeatable pressure.
-
Rotary Sample Divider - RSD Series
Splits bulk samples into representative sub-samples for consistent, reliable analysis.
-
Sample Splitter - SS
Riffle division of granular materials into equal, representative portions.
-
Jaw Crusher - JC1000–JC1300
Coarse and primary crushing of hard, brittle rocks, ores and minerals ahead of fine grinding.
-
Vibratory Disc Mill - VDM Series
Pulverises hard, brittle samples such as ores, rocks and slag to analytical fineness in minutes.
-
Ball Mill - BM Series
Reliable grinding and mixing of minerals, ores, soils and powders ahead of analysis.
-
Accelerating Rate Calorimeter - TAC-500AE
Studies thermal runaway and reaction hazards for process safety and battery testing.
-
Reaction Calorimeter - RC HP-1000AE
Measures the heat released by chemical reactions to support safe process scale-up.
-
20L Spherical Explosion Tester - ECD-20AE
Assesses the explosion severity of combustible dusts in a 20-litre sphere.
-
Dust Cloud Minimum Ignition Energy Tester - MIE-3000AE
Finds the minimum spark energy that ignites a dust cloud, for dust explosion safety.
-
Minimum Ignition Temperature Tester for Dust Clouds - MITC-1000AE
Determines the lowest surface temperature at which a dust cloud ignites.
-
Furnaces - Multiple series
Laboratory furnaces for heat treatment, ashing and sintering across research and quality control.
-
ElvaX Plus XRF Benchtop Spectrometer
Benchtop XRF for fast, non-destructive elemental analysis of metals, minerals and powders.
-
ElvaX Pro XRF Benchtop Spectrometer
Benchtop XRF with extended range and sensitivity for demanding elemental analysis.
-
Optical Emission Spectrometer (OES) - LABSPECTRO
Spark OES for fast, precise composition analysis of metals and alloys in production control.
-
Optical Emission Spectrometer (OES) - LABSPECTRO PRO
Spark OES for fast, precise composition analysis of metals and alloys in production control.
-
Multi-Zone Tube Furnace - PZF Series
Independently controlled heating zones for uniform or graded temperature profiles along the tube.
-
Hammer Mill - HM 1100
Impact grinding of brittle materials like grain, coal and minerals into consistent particle sizes.
-
Automatic Pellet Press - LP40T
Presses powders into uniform pellets for XRF and other analysis, with repeatable pressure.
-
Automatic Pellet Press - PP40
Presses powders into uniform pellets for XRF and other analysis, with repeatable pressure.
-
Rotary Sample Divider - RSD Series
Splits bulk samples into representative sub-samples for consistent, reliable analysis.
-
Sample Splitter - SS
Riffle division of granular materials into equal, representative portions.
-
Jaw Crusher - JC1000
Coarse and primary crushing of hard, brittle rocks, ores and minerals ahead of fine grinding.
-
Jaw Crusher - JC1100
Coarse and primary crushing of hard, brittle rocks, ores and minerals ahead of fine grinding.
-
Jaw Crusher - JC1200
Coarse and primary crushing of hard, brittle rocks, ores and minerals ahead of fine grinding.
-
Jaw Crusher - JC1300
Coarse and primary crushing of hard, brittle rocks, ores and minerals ahead of fine grinding.
-
Vibratory Disc Mill - VDM Series
Pulverises hard, brittle samples such as ores, rocks and slag to analytical fineness in minutes.
-
Tube Furnace - PTF Series
Heats samples in a tube under air, vacuum or controlled gas for synthesis and annealing.
-
Tube Furnace - STF Series
Heats samples in a tube under air, vacuum or controlled gas for synthesis and annealing.
-
Ashing Furnace - PAF Series
Burns off organic matter to measure ash content in coal, food, feed and polymers.
-
Asphalt Chamber Furnace - PASF
Ignition-method furnace for measuring binder content in asphalt mixtures.
-
Disc Mill / Pulverizer - DM 1100
Continuous fine grinding of hard and brittle materials between rotating discs.
-
Ball Mill - BM Series
Reliable grinding and mixing of minerals, ores, soils and powders ahead of analysis.
-
Cryogenic Ball Mill - CM1100
Grinds tough, elastic and temperature-sensitive samples under liquid-nitrogen cooling, keeping them intact.
-
ElvaX Plus XRF Benchtop Spectrometer
Benchtop XRF for fast, non-destructive elemental analysis of metals, minerals and powders.
-
ElvaX Pro XRF Benchtop Spectrometer
Benchtop XRF with extended range and sensitivity for demanding elemental analysis.
-
ICP-OES - ICP 5000 DV
Measures many elements at trace levels in a single run, for environmental, food and materials testing.
-
ICP-MS - ICP-MS 5500
Ultra-trace and isotopic elemental measurement for the most demanding quality and research work.
-
Prospector 2 XRF Handheld Spectrometer
Handheld XRF for on-the-spot alloy identification, scrap sorting and precious metal testing.
-
Prospector 3 Handheld XRF Spectrometer
Portable XRF for rapid elemental analysis in the field, at the scrapyard or on the shop floor.
-
Optical Emission Spectrometer (OES) - LABSPECTRO
Spark OES for fast, precise composition analysis of metals and alloys in production control.
-
Optical Emission Spectrometer (OES) - LABSPECTRO PRO
Spark OES for fast, precise composition analysis of metals and alloys in production control.
-
Cutting Mill - C25
Cuts soft, fibrous and heterogeneous materials such as plant matter, plastics and waste into uniform particles.
-
Cutting Mill - C90
Cuts soft, fibrous and heterogeneous materials such as plant matter, plastics and waste into uniform particles.
-
Hammer Mill - HM 1100
Impact grinding of brittle materials like grain, coal and minerals into consistent particle sizes.
-
Knife Mill - KM1100
Homogenises food, feed and moist samples with rotating blades for representative analysis.
-
Knife Mill - KM1300
Homogenises food, feed and moist samples with rotating blades for representative analysis.
-
Vibratory Sieve Shaker - VS1100
Separates and measures particle size distribution with three-dimensional sieving motion.
-
Air Jet Sieve Shaker - JS1100
Air-jet sieving for fine, dry powders that clog or agglomerate on conventional sieves.
-
Jaw Crusher - JC1000–JC1300
Coarse and primary crushing of hard, brittle rocks, ores and minerals ahead of fine grinding.
-
Vibratory Disc Mill - VDM Series
Pulverises hard, brittle samples such as ores, rocks and slag to analytical fineness in minutes.
-
Portable Cutting Mill - C10
A compact cutting mill for preparing fibrous and soft samples on site or on a crowded bench.
-
ElvaX Plus XRF Benchtop Spectrometer
Benchtop XRF for fast, non-destructive elemental analysis of metals, minerals and powders.
-
ElvaX Pro XRF Benchtop Spectrometer
Benchtop XRF with extended range and sensitivity for demanding elemental analysis.
-
ICP-OES - ICP 5000 DV
Measures many elements at trace levels in a single run, for environmental, food and materials testing.
-
ICP-MS - ICP-MS 5500
Ultra-trace and isotopic elemental measurement for the most demanding quality and research work.
-
CHN Elemental Analyser - LCHN3600
Determines carbon, hydrogen and nitrogen content in organic and inorganic samples.
-
Infrared Carbon Sulfur Analyser - LCS 3500
Measures carbon and sulfur in steel, iron, alloys, ores and other inorganic materials.
-
IR Sulfur Analyser - LS3000/IR
Infrared determination of total sulfur in coal, coke, oils and other fuels.
-
Cutting Mill - C10/C25/C90
Cuts soft, fibrous and heterogeneous materials such as plant matter, plastics and waste into uniform particles.
-
Vibratory Sieve Shaker - VS1100
Separates and measures particle size distribution with three-dimensional sieving motion.
-
Jaw Crusher - JC1000–JC1300
Coarse and primary crushing of hard, brittle rocks, ores and minerals ahead of fine grinding.
Applications
-
Planetary Nano Ball Mill - BM2200+
Grinds and mixes powders down to the nanometre range, for advanced materials research and sample preparation.
-
High Energy Ball Mill - MM1600
High-impact milling for fast size reduction, mechanical alloying and the synthesis of new materials.
-
Planetary Ball Mill - BM 1500+ Series
Fine grinding, mixing and homogenising of hard, brittle and fibrous samples, wet or dry.
-
Planetary Ball Mill - BM1150+
Fine grinding, mixing and homogenising of hard, brittle and fibrous samples, wet or dry.
-
Planetary Ball Mill - BM 1100+
Fine grinding, mixing and homogenising of hard, brittle and fibrous samples, wet or dry.
-
Planetary Ball Mill - BM 1200+
Fine grinding, mixing and homogenising of hard, brittle and fibrous samples, wet or dry.
-
Planetary Ball Mill - BM 1400+
Fine grinding, mixing and homogenising of hard, brittle and fibrous samples, wet or dry.
-
Cryogenic Ball Mill - CM1100
Grinds tough, elastic and temperature-sensitive samples under liquid-nitrogen cooling, keeping them intact.
-
Micro Ball Mill - MM1100
Quick grinding and homogenising of small sample volumes, ideal for routine laboratory preparation.
-
Cutting Mill - C10
Cuts soft, fibrous and heterogeneous materials such as plant matter, plastics and waste into uniform particles.
-
Cutting Mill - C25
Cuts soft, fibrous and heterogeneous materials such as plant matter, plastics and waste into uniform particles.
-
Cutting Mill - C90
Cuts soft, fibrous and heterogeneous materials such as plant matter, plastics and waste into uniform particles.
-
Cutting Mill - C Series
Cuts soft, fibrous and heterogeneous materials such as plant matter, plastics and waste into uniform particles.
-
Cutting Mill - C10/C25/C90
Cuts soft, fibrous and heterogeneous materials such as plant matter, plastics and waste into uniform particles.
-
Hammer Mill - HM 1100
Impact grinding of brittle materials like grain, coal and minerals into consistent particle sizes.
-
Knife Mill - KM1100
Homogenises food, feed and moist samples with rotating blades for representative analysis.
-
Knife Mill - KM1300
Homogenises food, feed and moist samples with rotating blades for representative analysis.
-
Knife Mill - KM1100/KM1300
Homogenises food, feed and moist samples with rotating blades for representative analysis.
-
Ultra Centrifugal Mill - UCM1100
Rapid, gentle fine grinding of soft to medium-hard materials with minimal heat build-up.
-
Vibratory Sieve Shaker - VS1100
Separates and measures particle size distribution with three-dimensional sieving motion.
-
Air Jet Sieve Shaker - JS1100
Air-jet sieving for fine, dry powders that clog or agglomerate on conventional sieves.
-
Automatic Pellet Press - LP40T
Presses powders into uniform pellets for XRF and other analysis, with repeatable pressure.
-
Automatic Pellet Press - PP40
Presses powders into uniform pellets for XRF and other analysis, with repeatable pressure.
-
Rotary Sample Divider - RSD Series
Splits bulk samples into representative sub-samples for consistent, reliable analysis.
-
Sample Splitter - SS
Riffle division of granular materials into equal, representative portions.
-
Jaw Crusher - JC1000
Coarse and primary crushing of hard, brittle rocks, ores and minerals ahead of fine grinding.
-
Jaw Crusher - JC1100
Coarse and primary crushing of hard, brittle rocks, ores and minerals ahead of fine grinding.
-
Jaw Crusher - JC1200
Coarse and primary crushing of hard, brittle rocks, ores and minerals ahead of fine grinding.
-
Jaw Crusher - JC1300
Coarse and primary crushing of hard, brittle rocks, ores and minerals ahead of fine grinding.
-
Jaw Crusher - JC1000–JC1300
Coarse and primary crushing of hard, brittle rocks, ores and minerals ahead of fine grinding.
-
Vibratory Disc Mill - VDM 1000 Series
Pulverises hard, brittle samples such as ores, rocks and slag to analytical fineness in minutes.
-
Vibratory Disc Mill - VDM 1100
Pulverises hard, brittle samples such as ores, rocks and slag to analytical fineness in minutes.
-
Vibratory Disc Mill - VDM 1200
Pulverises hard, brittle samples such as ores, rocks and slag to analytical fineness in minutes.
-
Vibratory Disc Mill - VDM Series
Pulverises hard, brittle samples such as ores, rocks and slag to analytical fineness in minutes.
-
Disc Mill / Pulverizer - DM 1100
Continuous fine grinding of hard and brittle materials between rotating discs.
-
Ball Mill - BM Series
Reliable grinding and mixing of minerals, ores, soils and powders ahead of analysis.
-
Mortar Grinder - HG 1100
Grinds, mixes and triturates powders and pastes, reproducing manual mortar work consistently.
-
Cyclone Mill Twister - TW1100
Fast grinding of grain, feed and food with cyclone separation, suited to NIR and nutrient analysis.
-
Portable Cutting Mill - C10
A compact cutting mill for preparing fibrous and soft samples on site or on a crowded bench.
-
Graphite Furnace - GRF
Ultra-high-temperature processing in an inert or vacuum atmosphere using graphite heating elements.
-
Vacuum Furnace - PVAC
Heat treatment, sintering and brazing under vacuum to prevent oxidation and contamination.
-
Atmosphere Controlled Furnace - ACF Series
Heat treatment under inert or reducing gases for oxidation-free sintering and annealing.
-
Modular Tube Furnace - MTF
A configurable tube furnace for annealing, synthesis and controlled-atmosphere work.
-
Modular Split Tube Furnace - ASP
A hinged tube furnace that opens for fast loading and cooling of tubes and reactors.
-
High Temperature Chamber Furnace - MoS Series
Box furnace for sintering, ceramics and material testing at very high temperatures.
-
Heat Treatment Furnace - HDF Series
Hardening, tempering and annealing of metal parts with precise temperature control.
-
Heat Treatment Furnace - HLF Series
Hardening, tempering and annealing of metal parts with precise temperature control.
-
Multi-Zone Tube Furnace - PZF Series
Independently controlled heating zones for uniform or graded temperature profiles along the tube.
-
Chamber Furnace - PLF Series
A general-purpose muffle furnace for ashing, drying and heat treatment in the laboratory.
-
Chamber Furnace - MoS Series
A general-purpose muffle furnace for ashing, drying and heat treatment in the laboratory.
-
Split Tube Furnace - ASP-W
Opens along its length to place and remove tubes quickly, ideal for reactor setups.
-
Tube Furnace - PTF Series
Heats samples in a tube under air, vacuum or controlled gas for synthesis and annealing.
-
Tube Furnace - STF Series
Heats samples in a tube under air, vacuum or controlled gas for synthesis and annealing.
-
Tube Furnace - PTF/PZF/STF Series
Heats samples in a tube under air, vacuum or controlled gas for synthesis and annealing.
-
Chamber Furnace Eco - Eco Series
An economical chamber furnace for everyday ashing, drying and heat treatment.
-
MoS Series Chamber Furnace
High-temperature chamber furnace with molybdenum disilicide elements for ceramics and sintering.
-
Furnaces - Multiple series
Laboratory furnaces for heat treatment, ashing and sintering across research and quality control.
-
ElvaX Plus XRF Benchtop Spectrometer
Benchtop XRF for fast, non-destructive elemental analysis of metals, minerals and powders.
-
ElvaX Pro XRF Benchtop Spectrometer
Benchtop XRF with extended range and sensitivity for demanding elemental analysis.
-
ICP-OES - ICP 5000 DV
Measures many elements at trace levels in a single run, for environmental, food and materials testing.
-
ICP-MS - ICP-MS 5500
Ultra-trace and isotopic elemental measurement for the most demanding quality and research work.
-
Prospector 2 XRF Handheld Spectrometer
Handheld XRF for on-the-spot alloy identification, scrap sorting and precious metal testing.
-
Prospector 3 Handheld XRF Spectrometer
Portable XRF for rapid elemental analysis in the field, at the scrapyard or on the shop floor.
-
CHN Elemental Analyser - LCHN3600
Determines carbon, hydrogen and nitrogen content in organic and inorganic samples.
-
Infrared Carbon Sulfur Analyser - LCS 3500
Measures carbon and sulfur in steel, iron, alloys, ores and other inorganic materials.
-
IR Sulfur Analyser - LS3000/IR
Infrared determination of total sulfur in coal, coke, oils and other fuels.
-
Optical Emission Spectrometer (OES) - LABSPECTRO
Spark OES for fast, precise composition analysis of metals and alloys in production control.
-
Optical Emission Spectrometer (OES) - LABSPECTRO PRO
Spark OES for fast, precise composition analysis of metals and alloys in production control.
-
Automatic Proximate Analyzer (TGA) - LPA4000
Automatically measures moisture, volatile matter, ash and fixed carbon in coal and biomass.
-
Bomb Calorimeter - BCI-2000
Measures the gross calorific value of coal, fuels, biomass and food samples.
-
Automatic Bomb Calorimeter - BCI 2000/T
Automated calorific value testing with less operator time for busy fuel laboratories.
-
Fully Automatic Bomb Calorimeter - BCI 3000
Fully automated calorific value measurement for high-throughput fuel testing.
-
Portable Coal Quality Test Analyser - FC-KH-01
Portable testing of coal quality parameters at mines, ports and power plants.
-
Ash Fusion Furnace - LAF16
Determines the ash fusion temperatures of coal, coke and biomass to predict slagging behaviour.
-
Ashing Furnace - PAF Series
Burns off organic matter to measure ash content in coal, food, feed and polymers.
-
Asphalt Chamber Furnace - PASF
Ignition-method furnace for measuring binder content in asphalt mixtures.
-
Micro Continuous Closed-Cup Flash Point Tester - FP CC-420AE
Determines the closed-cup flash point of fuels and solvents using small sample volumes.
-
Micro Vapor Pressure Tester - VP TE-1000AE
Measures the vapour pressure of fuels and volatile liquids for quality and safety compliance.
-
Glass Fusion Furnace - PGLS Series
Fuses samples with flux into glass beads for highly accurate XRF analysis.
-
Accelerating Rate Calorimeter - TAC-500AE
Studies thermal runaway and reaction hazards for process safety and battery testing.
-
Reaction Calorimeter - RC HP-1000AE
Measures the heat released by chemical reactions to support safe process scale-up.
-
20L Spherical Explosion Tester - ECD-20AE
Assesses the explosion severity of combustible dusts in a 20-litre sphere.
-
Dust Cloud Minimum Ignition Energy Tester - MIE-3000AE
Finds the minimum spark energy that ignites a dust cloud, for dust explosion safety.
-
Minimum Ignition Temperature Tester for Dust Clouds - MITC-1000AE
Determines the lowest surface temperature at which a dust cloud ignites.